A rapid dry/quick cure 100% solids penetrating epoxy sealer designed for use where less than ideal surface preparation is attainable or where surfaces have inherent porosity or surface weakness. It has a very low viscosity which allows it to wick into and bond porous substrates and residual rust into a tough epoxy composite. It may be applied to residual rust, degraded or new concrete, fibre-reinforced cement, and timber.
\r\n\r\nFEATURES:
\r\n\r\nHigh performance, two component, reinforced epoxy zinc-rich primer designed for use as a cathodic primer for protecting steel exposed to a variety of environments.
\r\n\r\nFEATURES:
\r\n\r\nA high build waterborne acrylic with excellent weatherability and corrosion resistance when coupled with the appropriate primer.
\r\n","","4 hours","Data","","","","","N/A","Water","",42,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",100,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","","false","true","","",""],[8420,631,7,"Carboguard 1209","Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete.
\r\nThis versatile coating provides an impenetrable film for severe exposures in marine, offshore,
\r\npetrochemical, pulp and paper and other aggressive environments. Optional use of light or course
\r\ngrit fillers provides nonskid properties.
Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete.
\r\nThis versatile coating provides an impenetrable film for severe exposures in marine, offshore,
\r\npetrochemical, pulp and paper and other aggressive environments. Optional use of light or course
\r\ngrit fillers provides nonskid properties.
Dense, highly impermeable glass flake-filled coating used for protecting steel and concrete.
\r\nThis versatile coating provides an impenetrable film for severe exposures in marine, offshore,
\r\npetrochemical, pulp and paper and other aggressive environments. Optional use of light or course
\r\ngrit fillers provides nonskid properties.
A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
\r\n\r\nFEATURES:
\r\n\r\nAvailability: Australia only
\r\n\r\nA high performance, immersion grade (fresh & salt water) chemically cured, zinc phosphate epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order.
\r\n\r\nHigh performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","","6 hours","5 days","","","","","4:1","#10","",80,"","","","","","","","","","","","","","","","","true","false","false","false","false","","10L kit","","","","",150,"","","","","","","","","","","3 hours","14 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","true","true","false","Potable Light Grey","true","true","","10L kit","Potable Light Grey"],[11533,625,7,"Carboguard 636 XT","
A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.
\r\n\r\nFEATURES:
\r\n\r\nA glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, impact resistance and barrier properties.
\r\n\r\nFEATURES:
\r\n\r\nHigh performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service.
\r\n\r\nFood Processing
\r\n\r\nNZ AsureQuality assessed & passed for food/beverage including dairy farm & factory non-incidental contact. Ref: H3108
\r\n\r\n\r\n\r\n
Potable Water Approval – AS 4020:2005
\r\n\r\nAustralian Water Quality Centre
\r\n\r\nCarboguard 690 White* Reference: 130243-2009-CSR-1
\r\n\r\nCarboguard 690 N53 Bl/Gr* Reference: 130243-2009-CSR-2
\r\n\r\nAMS Laboratories
\r\n\r\nCarboguard 690 N35 Lt. Gr* Reference: AMS 1316537A
\r\n","","4 hours","5 days","","","","","4:1","#2","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5L, 10L","","","","",175,"","","","","","","","","","","2 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","true","Black, MIOX, Aluminium,White,N53 Blue Grey","true","true","","",""],[7359,376,7,"Carboguard 690 GF","Phenalkamine Epoxy with Glass Flake Additive to increase chemical, abrasion & thermal shock resistance
\r\n\r\nHigh performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments.
\r\n\r\nIt can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects
\r\n\r\nAvailable in a range of standard and tintable colours.
\r\n","","4 hours","5 days","","","","","4:1 ","#2","",82,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","2 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[6901,417,7,"Carboguard 690 NS Medium","","","10 hours","5 days","","","","","4:1:1","#2","",84,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",250,"","","","","","","","","","","5 hours","15 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","false","true","","",""],[38,486,7,"Carboguard 838 (formally Carboguard 808)","High build intermediate and finish coating with
\r\nexcellent physical properties and good all around
\r\nchemical resistance. This material provides very
\r\ngood adhesion and better tolerance of field
\r\napplication variables than other type of coatings.
Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks.
\r\n\r\nOffshore applications include sub-sea, jackets, production decks, drilling rig legs, pontoons, in immersed surfaces.
\r\n\r\nIt meets the demands in the IMO Performance Standard for Protective Coatings.
\r\n\r\nIt is classified “B1” (Superior Grade) under DNV standard “Testing and Classification of Ballast Tank Coatings”. It is type approved by ABS for ballast tanks and double bottom spaces
\r\n","","N/a","N/a","","","","","1:1","#10","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","8 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","true","","","false","true","","",""],[11578,605,7,"Carboquick 200","This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats.
\r\nThis significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.
FEATURES:
\r\n\r\nAn aliphatic acrylic-polyester polyurethane, high build, low sheen finish that has excellent resistance to corrosion, hemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.
\r\n\r\nFeatures
\r\n\r\n• Outstanding performance properties in both mild
\r\nand aggressive environments
\r\n• High build; suitable for many two-coat systems
\r\n• Suitable for application direct to inorganic zincs
\r\n• Application by spray, brush or roller
\r\n• Indefinite recoatability
\r\n• VOC compliant to current AIM regulations
High gloss polyurethane finish with exceptional weathering performance characteristics.
\r\n\r\nUsed extensively in virtually every market sector, including marine exposure, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nA weldable pre-construction inorganic zinc primer for shop use only.
\r\n\r\nFEATURES:
\r\n\r\nPremium, ultra-durable ambient cured finish meeting AAMA 2604 performance requirements. 950 VOC is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 VOC offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.
\r\n","","","","","","","","15:1","#214","",38,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1 Gallon kit, 3.2 Gallon kit","","","","",50,"","","","","","","","","","","3","20","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","true","","true","true","","",""],[11125,274,7,"Carbozinc 11","Time-tested corrosion resistant primer that protects steel galvanically in the harshest environments. For over four decades, Carbozinc 11 (CZ 11) has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide
\r\n\r\n\r\n\r\n
Made to Order or imported lines subject to availability.
\r\n\r\nCarbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats
\r\n\r\n\r\n\r\n
NEW 4:1 Ratio
\r\n\r\nLow VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications
\r\n\r\n\r\n\r\n
Low VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications
\r\n\r\n\r\n\r\n
A very economic, two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates.
\r\n\r\nCarbozinc 859 EZ2 can be applied by conventional, airless, or plural component spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired.
\r\n\r\nTypical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial, offshore or architectural projects.
\r\n","","90 minutes","Extended","","","","","4:1","#2","",70,"","","","","","","","","","","","","","","","","true","true","false","false","false","","10L kit","","","","",75,"","","","","","","","","","","90 minutes","Extended","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","true","true","false","Green, Grey","true","true","","10L kit","Green, Grey"],[8185,630,7,"Chem~Bar 800","Specifically formulated to protect metal exposed to weather, water, or chemicals. Typically used for the protection of structural steel, tanks, pipes, equipment industries such as Pulp and Paper, Chemical Processing, Water and Waste Water, Refineries, Fertiliser Plants, Marine Installations, Bridges, and Power Projects.
\r\n","","N./A","N/A","","","","","N/A","#10","",42,"","","","","","","","","","","","","","","","","","","true","false","true","","10L ","","","","",100,"","","","","","","","","","","8 hours","Extended","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","Metallic Grey","false","true","","",""],[11168,88,7,"Chem~Bar 900","Chem~Bar 900™ is specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals.
\r\n\r\nChem~Bar 900™ may be used to protect structural steel, tanks, pipes and equipment a vast range of industries.
\r\n\r\nIt's recoatable properties, highly anti-corrosive formulation and ease of application make it an ideal coating for both maintenance and new work.
\r\n\r\n\r\n","Vinyl / Acrylic","N/a","N/a","Single Pack","","","","N/A","#10","",45,1.47000002861023,50,125,"","White, Black and tint range","Low Sheen","","","","","","Vinyl Acrylic","","","","","true","true","false","true","false","","4L, 10L","","70 C dry","","",75,"","","","","","","","","2 hrs","6 hrs","12 hours","Data","","","","","Altex / ICI","Finish","Vinyl / Acrylic","","","","","","","","false","manufactured","true","true","true","false","true","true","true","Black, White","true","true","","",""],[11193,87,7,"Chem~Bar 900 Aluminium","
Metal Spray Sealer - a traditional Vinyl sealer used in accordance with ASNZ2312 Zinc Metalspray systems, as well as a single package high performance aluminium filled vinyl-acrylic finish suitable for use as a general purpose aluminium finish.
\r\n\r\nChem~Bar 900™ Aluminium may be used in all atmospheric exposures where traditional aluminium finishes may be employed; including:
\r\n\r\n\r\n","Chlorinated Rubber","","","Single Pack","","","","N/A","#10","",35,0,50,100,"","","","","","","","","Chlor rubber top coat","","finish coat in a chlor rubber spec\r\nopen ended recoat time.","August, 30 1994 00:00:00 +1200","","true","true","false","true","false","","10L","","","","",40,"","","","","","","","","30 min","12 hrs","12 hours","14 days","","","","","Superseded","Finish","Chlorinated Rubber","","","","","","","","false","manufactured","true","true","true","false","true","true","false","","true","true","","",""],[10090,599,7,"Euclid Duralkote 700","
Anti-Carbonation Coating for Concrete
\r\n","","24 hrs","","","","","","N/A","#10","",58,"","","","","","","","","","","","","","","","","","","false","false","false","","20kg","","","","",125,"","","","","","","","","","","8 hrs","","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","Grey","true","true","","",""],[1310,131,7,"E~Line 239","E~Line® 239 is a high performance, acrylic polyurethane which will provide excellent gloss and colour retention as well as resistance to moderate/severe corrosive environments for structures equipment and fixtures.
\r\n\r\nE~Line® 239 is recommended for use on:
\r\n\r\nE~Line® 239-Recommended for steel, aluminium, masonry, timber or fibreglass when correctly prepared and primed
\r\n","Acrylic Urethane","N/a","N/a","Two Pack","",4,1,"4:1","#25","#5",56,1.37999999523163,50,75,"","AS 2700, BS 381C, BS 5252","High Gloss","",8,"","","","","","","","","true","true","true","false","true","","1, 5, 20 litre kits","Normal, 12 months","121 C Dry",0,30,50,"0","48","12","","0","12","6","","0","8","4 hours","Data","0","6","3","","Altex","Finish","Urethane",0,"","February, 08 2000 00:00:00 +1300","A Webb","","","","true","manufactured","true","true","true","false","false","true","","","false","true","","",""],[11428,224,7,"E~Line 379","High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.
\r\n\r\nFEATURES:
\r\n\r\nE~Line 949 is a fast cure, economical, high gloss, aliphatic polyurethane designed for use in areas where good gloss and colour retention are required.
\r\n\r\nE~Line 949 is ideal for use where a polyurethane finish is specified and where economy and rapid drying are desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:
\r\n\r\nA high performance fast-dry solventborne line-marking paint, possessing excellent drying and good wear resistance properties.
\r\n\r\nDesigned for road surfaces with a relatively high vehicle traffic count, providing a higher level of durability than traditional road marking paints.
\r\n\r\nFEATURES:
\r\n\r\nRustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and will accept a variety of topcoats.
\r\n\r\nRecommended use as primer/sealer for marginally prepared steel and over old coatings. The excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats.
\r\n\r\nThe thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling.
\r\n","","18 hours","30 days","","","","","1:1","#76","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1L, 4L","","","","",40,"","","","","","","","","","","18 hours","30 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[11278,638,7,"Rustbond PS","Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher
\r\ntemperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.
Zinkex 100 is an excellent primer for chlorinated rubber and vinyl finish coats. It may be used as a “cold galvanising” coating for the repair of hot-dip galvanised surfaces.
\r\n\r\nZinkex 100 may be left untopcoated in non-corrosive atmospheres.
\r\n\r\nZinkex 100 is suitable for maintenance use in the following areas:
\r\n\r\n