{"COLUMNS":["productcategoryid","productid","categoryid","product_name","product_description","Type","topcoat_min","topcoat_max","Components","SpecComponents","MixRatBase","MixRatConv","MixRatio","ThinS","ThinB","VolSol","Density","DFTL","DFTH","VOC","Colours","Gloss","AppMeth","Potlife","Uses","Features","Approvals","Application","Limitations","Notes","DataEntryDate","DataModificationDate","avail_nz","avail_aus","not_avail_nz","not_avail_aus","not_avail_sp","Supercedes","Packaging","Storage","TempResis","FlashPoint","InductTime","CDFT","TD5","HD5","RecMin5","RecMax5","TD15","HD15","RecMin15","RecMax15","TD20","HD20","RecMin20","RecMax20","TD25","HD25","RecMin25","RecMax25","CatRange","CatGroup","CatType","Cost","EntryDate","ModDate","EnterBy","url","popproduct","newproduct","jpg","impman","pds","nz_sds","aus_sds","marketing_brochure","web_publish","order_publish","tinted","colours_standard","publish","status","coverage","category_name"],"DATA":[[4008,458,14,"AY&B Epoxy Barrier Undercoat","<p>Altex Yacht &amp; Boat Paint Epoxy Barrier Undercoat is a high performance, sandable epoxy high build coating which is both very corrosion and water resistant.</p>\r\n\r\n<p>Epoxy Barrier Undercoat is recommended for:</p>\r\n\r\n<ul>\r\n\t<li>Topside &amp; Superstructure final sealing to provide an optimum surface for finish coating</li>\r\n\t<li>As a high build surfacer to remove defects and achieve a finish suitable for application of Altex Polyurethane Undercoat or one of the Elite Polyurethane finish coats</li>\r\n\t<li>As a high build barrier coat for below waterline application, used as part of an Altex Antifouling system</li>\r\n\t<li>Direct application to sanded GRP, epoxy laminated wood and epoxy sealed wood</li>\r\n\t<li>Direct application to epoxy faired surfaces</li>\r\n</ul>\r\n\r\n<ul>\r\n\t<li>Application over Altex Epoxy Primer or Altex Epoxy High Build Surfacer</li>\r\n\t<li>Priming / undercoating over degreased &amp; sanded aged polyurethanes, epoxies, fairing systems, gelcoats, epoxy laminates &amp; fibreglass</li>\r\n</ul>\r\n\r\n<p>&nbsp;</p>\r\n\r\n<p><u>Advantages:</u></p>\r\n\r\n<ul>\r\n\t<li>Excellent build properties up to 150&micro;m DFT in a two pass application</li>\r\n\t<li>Excellent surfacing and sanding properties</li>\r\n\t<li>Very good corrosion protection</li>\r\n\t<li>Wide maximum self re-coat times for easy project management</li>\r\n\t<li>Very good water and chemical resistance</li>\r\n\t<li>Epoxy Barrier Undercoat may be top-coated with both acrylic or polyester urethane finishes and is especially formulated as an undercoat or sealer under the Altex Elite&reg; range of polyurethane finish coats</li>\r\n\t<li>May be used as a high build surfacer / undercoat for topcoating with Altex Polyurethane Undercoat</li>\r\n\t<li>May be used in immersion service as part of an Altex Yacht &amp; Boat recommended system</li>\r\n</ul>\r\n","","6 hours","5 days","","","","","4:1","#12","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1.25L, 5L, 10L","","","","",100,"","","","","","","","","","","6 hours","10 days","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","White, Light Grey","true","true","","AY&amp;B  Undercoats"],[3918,183,14,"AY&B Epoxy High Build Surfacer ","<h3>Recommended Uses</h3>\r\n\r\n<p><strong>Altex Yacht &amp; Boat Epoxy High Build Surfacer </strong>is a two component new technology high build epoxy surfacer and profiling compound<strong>.</strong></p>\r\n\r\n<p><strong>Altex Epoxy High Build Surfacer </strong>is designed to fill and profile minor imperfections such as found on epoxy glass lay-ups, sanded epoxy fairing compounds, and repair sites on damaged structures.</p>\r\n\r\n<p><strong>The recommended maximum dry film thickness per coat is 0.5mm (500 microns).</strong></p>\r\n\r\n<p><strong>Altex Epoxy High Build Surfacer </strong>may be applied by spray or squeegee, or a combination of both<strong>.</strong></p>\r\n\r\n<p>&nbsp;</p>\r\n\r\n<p>Features</p>\r\n\r\n<ul>\r\n\t<li>Excellent build and filling qualities</li>\r\n\t<li>Light-weight</li>\r\n\t<li>Easily applied without specialised equipment</li>\r\n\t<li>Excellent sanding properties</li>\r\n\t<li>Excellent water resistance</li>\r\n\t<li>Compatible with many substrates including suitably primed steel, aluminium, gel-coat, epoxy laminates, composites etc.</li>\r\n\t<li>May be applied direct to fresh epoxy laminate and composites</li>\r\n\t<li>May reduce labour input during the fairing stages of new builds</li>\r\n</ul>\r\n","Epoxy","24 hours","Must sand","Two Pack","",4,1,"4:1","#12","",70,1.10000002384186,300,500,255,"Straw","Flat","",3,"","","","","","","","","true","true","false","false","false","","5L, 10L","","",5,15,500,"","","","","","","","","2 hrs","24 hrs","24 hours","Must sand","","","","","A.Y.B.","Intermediate","Epoxy",0,"June, 04 2004 00:00:00 +1200","","G Moran","","","","true","manufactured","true","true","true","false","true","true","false","Straw","true","true","","AY&amp;B  Undercoats"],[368,426,14,"AY&B HB Epoxy","<p>High Build Sandable Undercoat</p>\r\n","","","","","","","","4:1","#12","",53,"","","","","","","","","","","","","","","","","true","true","true","false","true","","","","","","",100,"","","","","","","","","","","24 hours","5 days","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","true","","","false","true","","AY&amp;B  Undercoats"],[97,184,14,"AY&B No.3 Epoxy Primer Undercoat ","<h2>Features:</h2>\r\n\r\n<p><strong>No.3 Epoxy Primer Undercoat is designed for use as:</strong></p>\r\n\r\n<ul>\r\n\t<li>Final surfacing coat for marine topsides prior to applying a polyurethane topcoat</li>\r\n\t<li>High build sanding surfacer to remove orange peel, brush marking and scratches</li>\r\n\t<li>No.3 Epoxy Primer Undercoat may be applied to:-</li>\r\n\t<li>Suitably prepared and primed aluminium and GRP hulls of trailer boats (above and below water) if top-coated with a polyurethane topcoat</li>\r\n\t<li>Direct to sanded&nbsp; GRP, epoxy laminated wood and epoxy sealed wood, above and below water</li>\r\n\t<li>Direct to coving or filled areas shaped with Filling and Fairing</li>\r\n</ul>\r\n\r\n<h2>Advantages:</h2>\r\n\r\n<ul>\r\n\t<li>Improved Formula</li>\r\n\t<li>Enhanced sanding and de-dusting properties</li>\r\n\t<li>Improved neutral grey tone for top-coat colour compatibility</li>\r\n\t<li>Enhanced gloss hold out for finish coatings</li>\r\n\t<li>Rapid cure to sanding time - even at temperatures below 10&deg;C</li>\r\n</ul>\r\n\r\n<p>Free sanding properties with easy de-dusting - does not clog production sand papers.<br />\r\n<br />\r\nNote:&nbsp;<strong>DO NOT</strong>&nbsp;sand with stearate coated sand papers as this could impair intercoat adhesion</p>\r\n\r\n<ul>\r\n\t<li>Good long term self-recoatability with sanding</li>\r\n\t<li>Lead and chromate free</li>\r\n\t<li>Isocyanate free</li>\r\n\t<li>Excellent build properties when spray applied</li>\r\n\t<li>Suitable for all areas of hull on trailer and moored vessels</li>\r\n</ul>\r\n","Epoxy Surfacer","","","Two Pack","",4,1,"4:1","#12","U22",48,1.50999999046326,50,100,"","Pale Cream, Grey","Flat","",6,"","","","Sandable Epoxy Build coat\r\nIMPORTANT INFORMATION = REFER TO GENERAL AREA OF APPLICATION","","Marine Final Surfacer before topcoating\r\nNOTE : Recoat with itself = 312 hrs\r\nMaximum overcoat with polyurethane = 48hrs\r\nRecoat outside maximum recoat times = No.3 light sand and a thin coat of No3 applied.","August, 30 1994 00:00:00 +1200","May, 28 1996 00:00:00 +1200","true","true","false","false","false","","","","",27,20,75,"","","","","","","","","2 hrs","6 hrs","6 hour","48 hours","","","","","A.Y.B.","Primer","Epoxy","","","","","","","","true","","true","true","true","false","false","true","","","false","true","","AY&amp;B  Undercoats"],[98,185,14,"AY&B No.4 Epoxy Primer Sealer ","<h2>Features:</h2>\r\n\r\n<p>No.4 Epoxy Sealer Undercoat is a professional grade primer ideally suited to lengthy new-build or repaint projects where different epoxy surfacers, undercoats and fairing compounds - of different ages - require to be sealed and prepared for final finishing.</p>\r\n\r\n<p>In repaint situations where areas of the same job may be spot-filled, have existing sanded polyurethane finish and / or sanded epoxy undercoat, No.4 Epoxy Sealer Undercoat provides an excellent one-step tie-coat and sealer prior to applying urethane finish coats.</p>\r\n\r\n<p>No.4 Epoxy Sealer Undercoat may be top-coated with acrylic or polyester urethane finishes and is especially formulated as a sealer under Elite Polyurethane, Elite Pro~Spray, and Boero Challenger HT finishes.</p>\r\n\r\n<h2>Advantages:</h2>\r\n\r\n<p>No.4 Epoxy Sealer Undercoat is an excellent adhesion coat when applying a new finish over existing aged, and suitably prepared, polyester or acrylic urethane gloss coatings.</p>\r\n\r\n<ul>\r\n\t<li>Available in a carefully selected grey tone allowing easy obliteration with low opacity finish coats.</li>\r\n\t<li>Excellent lay-down qualities minimise the need for sanding prior to application of gloss finish coats.</li>\r\n\t<li>In a multi-coat sequence No.4 Epoxy Sealer Undercoat can provide priming and barrier coat capabilities direct to prepared GRP and epoxy laminates.</li>\r\n\t<li>Suitable for service above and below water&nbsp;</li>\r\n</ul>\r\n","Epoxy Primer","","","Two Pack","",4,1,"4:1","#12","U20",39,0,50,75,0,"White and Grey","Low sheen","",12,"","","","","","","","","false","true","false","false","false","","5 litre","24 months","121 C dry",0,15,50,"","","","","","","","","1hr","12hr","12 hours","10 days","","","","","A.Y.B.","Primer","Epoxy",0,"May, 07 2003 00:00:00 +1200","","A Webb","","","","true","","true","true","true","false","false","true","","","false","true","","AY&amp;B  Undercoats"],[3910,482,14,"AY&B Polyurethane Undercoat","<h3>&nbsp;</h3>\r\n\r\n<p>Altex Yacht &amp; Boat Paint Polyurethane Undercoat is a high performance, sandable undercoat which exhibits a number of significant advantages over existing PUR undercoats.</p>\r\n\r\n<p>By combining new technology polyurethane binders, Altex Polyurethane Undercoat features excellent build characteristics &amp; superior water resistance, coupled with low temperature cure &amp; extended pot life. The sanding qualities are second to none.</p>\r\n\r\n<p>&nbsp;</p>\r\n\r\n<p>Polyurethane Undercoat is recommended for:</p>\r\n\r\n<ul>\r\n\t<li>Use above the waterline only</li>\r\n\t<li>Maximised adhesion when transitioning between epoxy undercoats and the selected polyurethane finish coat - in all marine situations</li>\r\n\t<li>Direct application to sanded, aged polyurethane topcoats for &ldquo;Two step &ndash; Two coat&rdquo; maintenance repaint work</li>\r\n\t<li>Exterior topside &amp; superstructure final sealing to provide a fully recoatable surface for extended periods before sanding &amp; finish coating</li>\r\n</ul>\r\n\r\n<ul>\r\n\t<li>Application over all AY&amp;B epoxy systems</li>\r\n</ul>\r\n\r\n<ul>\r\n\t<li>Excellent build tolerance up to 100&micro;m DFT in a two pass application</li>\r\n\t<li>Superior sanding properties</li>\r\n\t<li>Wide maximum over coating times for easy project management</li>\r\n</ul>\r\n","","16 hours","See Data","","","","","4:1","#20","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1.25L, 5L","","","","",100,"","","","","","","","","","","16 hours","4 days","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","White, Monochromatic Grey","true","true","","AY&amp;B  Undercoats"],[3907,172,14,"AY&B Surfacer Undercoat","<h3><strong>Altex Yacht &amp; Boat Surfacer Undercoat is designed for use in above water areas only. </strong></h3>\r\n\r\n<p><strong>It can be used:</strong></p>\r\n\r\n<ul>\r\n\t<li>As a surfacing and build coat in the Single Component topsides marine paint system.</li>\r\n\t<li>As an adhesion/surfacing coat directly to suitably prepared fibre-glass gel-coat.</li>\r\n\t<li>Direct to suitably prepared and sealed timber for cabin interiors.</li>\r\n\t<li>As a tie coat and upgrade on existing sound enamel finishes after correct preparation</li>\r\n</ul>\r\n\r\n<h3>Features</h3>\r\n\r\n<ul>\r\n\t<li>Proven performance over many years in all above water applications</li>\r\n\t<li>Good long term sandability</li>\r\n\t<li>Excellent long term re-coatability with itself</li>\r\n\t<li>May be used direct on suitably prepared gel-coat</li>\r\n\t<li>Good cure response and sandability make Altex Surfacer Undercoat an excellent surfacing medium&nbsp;to cover minor scratches etc&nbsp;</li>\r\n</ul>\r\n","Alkyd Undercoat","8 hours","7 days","Single Pack","","","","N/A","#53","Turps",53,1.48000001907349,40,60,"","Slightly Off-White","Flat","","","","","","Sandable single pot undercoat","","Marine\r\nNOTE: touch dry after 1 hr, dry to sand 10-12hrs","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","500ml, 1L, 4L ","","",35,"",50,"","","","","","","","","1.5 hrs","12 hrs","8 hours","7 days","","","","","A.Y.B.","Primer","Alkyd","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","AY&amp;B  Undercoats"]]}