A-20 Accelerator injection solution is made on site by dissolving the recommended amount of aluminuim sulphate in water and injecting the solution into the mixed stream of Southwest Type 5GP immediately behind the spray nozzle.
\r\n\r\nCare must be taken to adjust the solution strength to the recommended concentration and the injection at the recommended rate.
\r\n\r\nA-20 Accelerator allows increased thickness per application and rapid same day self re-coat when required.
\r\n","","","","","","","","Data","Data","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","false","true","","","false","true","","",""],[621,"A/D TC-55 Sealer","A water based vinyl acrylic copolymer emulsion of fine particle size. Films retain high degree of flexibility and elongation.
\r\n\r\nA/D TC-55 Sealer may be used as an adhesive and/or sealer with cementitious sprayed fire resistive materials and insulation products. A/D TC-55 Sealer improves adhesive bond of fireproofing and insulation products to steel, concrete and other substrates. When applied as a topcoat/sealer, it improves most physical characteristics, reduces air erosion losses and may be used to color the fireproofing or insulation surface.
\r\n","","Tacky","Tacky","","","","","1:1","Water","",49,"","","","","","","","","","","","","","","","","","","false","false","false","","5 gal pail, 45 gal drum","","","","",100,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","false","Clear, limited range of colours","true","true","","",""],[579,"A20 Accelerator","Alunimium sulphate accelerator for Southwest Type 5GP sprayed cementitious fireproofing
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","false","false","false","","true","true","","",""],[17,"ABC-3","Ablative Antifouling","Anti-Fouling","","","Single Pack","","","","N/A","1/2","",52,1.840000033379,75,100,414,"Black, Red","Flat","","","","","","","","","","","true","true","false","false","false","","4 and 10 litre cans","","",37,"",100,"","","","","","","","","2 hrs","5 hrs","4 hrs","Data","","","","","Ameron","Anti-Fouling","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[312,"AF1000","","","","","","","","","N/A","1/2","",52,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","4 hrs","N/A","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[311,"AF3000","","","","","","","","","N/A","1/2","",52,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","4 hrs","N/A","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[313,"AF4000","","","","","","","","","N/A","X-100","",46,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","4 hrs","N/A","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[56,"AP956 Anticorrosion Chloro-Rubber Primer","Chlorinated Rubber Primer","Chlorinated Rubber","","","Single Pack","","","","N/A","E 10","E 10",34,1.340000033379,50,100,578,"Silver Grey","Flat","","","","","","","","","","","true","true","false","false","false","","","","60 C dry",27,"",75,"","","","","","","","","30 min","3 hrs","3 hrs","Data","","","","","SuperNavi","Primer","Chlorinated Rubber","","May, 14 2004 00:00:00 +1200","","G Moran","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[247,"AY&B 221 Filler","Marine Epoxy Filler","","","","","","","","2:1","","",0,"","","","","","","","","","","","","","","","","false","true","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","false","","","false","","true","true","false","false","false","true","","","false","true","","",""],[25,"AY&B Alloy Anti-Fouling","Ablative Cu-free Antifouling for Stern Legs etc.","Anti-Fouling","","","Single Pack","","","","","1/2","1/2",44,1.259999990463,75,100,"","Black, Blue, White, Scarlet","Flat","","","","","","Resene Devoe Australias, Anti-fouling for Aluminium hulls","","","May, 05 1995 00:00:00 +1200","","true","true","false","false","false","","500 ml cans","","",27,"",100,"","","","","","","","","2 hrs","8 hrs","6 hrs","","","","","","A.Y.B.","Anti-Fouling","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[530,"AY&B Coastal Copper Antifouling","An ablative antifouling designed for both yachts and launches where an economically priced antifouling is required.
\r\n\r\nProvides 12 months protection from two coats (75 microns each)
\r\n\r\nCoastal Copper has been used in NZ, Pacific and Australian waters for over 20 years and has consistently provided affordable and predictable protection from marine growth.
\r\n\r\n\r\n\r\n
NOW AVAILABLE IN AUSTRALIA!
\r\n\r\n\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n","","N/A","N/A","","","","","","#12","",52,"","","","","","","","","","","","","","","","","","","false","false","false","","4L","","","","",100,"","","","","","","","","","","6 hours","N/A","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","false","false","false","Red, Black, Blue","false","true","","",""],[620,"AY&B Elite 239","
Elite 239 is a high-performance, high gloss, acrylic polyurethane which will provide excellent gloss and colour retention as well as resistance to moderate/severe marine environments.
\r\nElite 239 is recommended for use on:
Features:
\r\n\r\nElite 321 Brushing Polyurethane is a specialised marine finish coat formulated for brush and roller application. It is based on the latest cyclo-aliphatic polyester technology, giving a high quality and durable finish coat with long lasting gloss.
\r\nIt has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
FEATURES:
\r\nElite Defender is a professional grade spraying finish coat especially formulated for use in the marine industry and provides a convenient 1:1 (Part A : Part B) mix ratio by volume.
\r\nBased on the latest aliphatic urethane technology, giving exceptional UV protection and an ultra durable gloss. It has been developed specifically to resist the high UV light exposure in both NZ and Australia.
\r\nIt's designed to provide a high quality finish for both maintenance repaint and new construction in the marine industry.
\r\nElite Defender is recommended for:
\r\n
FEATURES:
\r\n\r\nElite® Pro~Spray Linear Polyurethane is a professional grade spraying finish coat especially formulated for use in the marine industry and provides a convenient 1:1 (Part A : Part B) mix ratio by volume.
\r\n\r\nElite® Pro~Spray is based on the latest aliphatic urethane technology, giving exceptional UV protection and an ultra durable gloss. It has been developed specifically to resist the high UV light exposure in both NZ and Australia.
\r\n\r\nElite® Pro~Spray is designed to provide a high quality finish for both maintenance repaint and new construction in the marine industry.
\r\n\r\n\r\n\r\n
Elite® Pro~Spray is recommended for:
\r\n\r\nAltex Epoxy Barrier Undercoat or
\r\n\r\nAltex Polyurethane Undercoat
\r\n\r\nConvenient 1:1 volume mix ratio
\r\n\r\nElite Refine 250 Low Sheen Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.
\r\nIt has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
\r\nIt is recommended for use on all vessel types to repaint:
FEATURES:
\r\nElite Refine 450 Semi-Gloss Polyurethane is a specialised marine finish coat. It is based on the sophisticated combination of aliphatic urethanes and urethane reactive acrylic resins, giving a high quality and durable finish coat as well as resistance to moderate/severe marine environments.
\r\nIt has been especially designed for both the Professional and DIY painter for maintenance repainting of all yachts, launches and other pleasure craft. An easy to use, high performance polyurethane with good flow-out and wet-edge characteristics, balanced with rapid dry-to-touch – makes re-paint projects on the hardstand or on the water a practical proposition.
\r\nIt is recommended for use on all vessel types to repaint:
FEATURES:
\r\nElite Polyurethane is our original formulation, based on the latest aliphatic urethane technology, giving a light fast finish coat with long lasting gloss.
\r\n\r\nLimited availability in the 4:1 mix ratio
\r\n\r\nAltex Yacht & Boat Epoxy Aluminium Primer is a two component primer utilising high performance, anti-corrosive chromates designed for use on aluminium launches, dinghies & yachts.
\r\nIt has been developed for use above the waterline (non-immersion) to provide the very best adhesion to aluminium substrates, and for optimum protection against filiform corrosion.
\r\nEpoxy Aluminium Primer is recommended for:
FEATURES:
\r\nNote: Epoxy Aluminium Primer is not suitable for use on surfaces subject to continuous immersion.
\r\n","","2 hours","24 hours","","","","","1:1","#12","",30,"","","","","","","","","","","","","","","","","","","false","false","false","","500ml kit","","","","",20,"","","","","","","","","","","3 hours","24 hours","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","500ml kit",""],[4,"AY&B Epoxy Aluminium Primer (CF)","Altex Yacht & Boat Epoxy Aluminium Primer is a two component primer utilising state of the art chrome & lead free, complex magnesium anti-corrosive technology designed for use on aluminium structures, plate and extrusions and galvanised substrates.
\r\n\r\nIt has been developed for use above the waterline (non-immersion) to provide the very best adhesion to aluminium substrates, and for resistnce to filiform corrosion.
\r\n\r\nEpoxy Aluminium Primer is recommended for:
\r\n\r\n\r\n\r\n
CF- Chromate free is available in Australia only.
\r\n\r\n\r\n\r\n
Note: Epoxy Aluminium Primer is not suitable for use on surfaces subject to continuous immersion.
\r\n\r\n\r\n","Epoxy","","","Two Pack","",1,1,"1:1","#12","U22",30,1.100000023842,15,25,"","Pale Yellow","Low Sheen","",12,"","","","Same as Devbond","","","August, 30 1994 00:00:00 +1200","","true","true","true","false","true","","500 ml kits","","",27,15,20,"","","","","","","","","15 min","3 hrs","3 hours","24 hours","","","","","A.Y.B.","Primer","","","","","","","","","true","manufactured","true","false","true","false","false","true","","","false","true","","",""],[458,"AY&B Epoxy Barrier Undercoat","
Altex Epoxy Barrier Undercoat is a high performance, sandable epoxy high build coating based on new technology Phenalkamide hybrid resins, which offers both superior corrosion and water resistance.
\r\nThis new epoxy undercoat offers both the DIY and Professional applicator an easy-to-use product with a diverse range of uses and benefits.
\r\nAY&B Epoxy Barrier Undercoat is recommended for:
FEATURES:
\r\nAltex Epoxy Everseal is a two-pack epoxy timber sealer and preservative. It is designed for use on all timber surfaces, including those immersed in fresh or sea water. This product provides the initial pre-treatment of timber surfaces before applying a suitable coating system. It helps control distortion, cracking, and shrinkage of timber, and limits water penetration, particularly into the timber end grain.
\r\n\r\nFEATURES:
\r\n\r\n421 Epoxy Filler is a high quality general purpose marine grade epoxy filler that can be used for filleting and minor filling, above and below water.
\r\n
\r\n421 Epoxy Filler is ideal for filling screw holes and surfacing timber.
\r\n
\r\n421 Epoxy Filler is NOT recommended for bedding of steel and lead keels.
Altex Yacht & Boat Epoxy Filler is a high quality, general purpose, marine grade epoxy filler that can be used for filleting and minor filling, above and below water.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","true","true","","",""],[488,"AY&B Epoxy Glue","Altex Epoxy Glue is a high quality general purpose marine grade epoxy glue that can be used for a variety of marine applications:
\r\nFEATURES:
\r\nNOTE: AY&B Epoxy Glue should NOT be used on Boric Treated Timber
","","N/A","N/A","","","","","4:1","#12","",100,"","","","","","","","","","","","","","","","","true","false","false","true","true","","351gm kit, 1.4kg kit","","","","",1000,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","",""],[183,"AY&B Epoxy High Build Surfacer ","Altex Epoxy High Build Surfacer is a two-component new technology high build epoxy surfacer and profiling compound.
\r\nAY&B Epoxy High Build Surfacer is designed to fill and profile minor imperfections such as found on epoxy glass lay-ups, sanded epoxy fairing compounds, and repair sites on damaged structures.
\r\nThe recommended maximum dry film thickness per coat is 0.5mm (500 microns).
\r\nAltex Epoxy High Build Surfacer may be applied by spray or squeegee, or a combination of both.
\r\nAltex Epoxy High Build Surfacer is suitable for service above and below water however in immersion service a full epoxy barrier system should be applied over the sanded Altex Epoxy High Build Surfacer.
FEATURES:
\r\n\r\nNOTE: Altex Epoxy High Build Surfacer is NOT a fairing compound and should NOT be overbuilt.
","Epoxy","24 hours","Must sand","Two Pack","",4,1,"4:1","#12","",70,1.100000023842,300,500,255,"Straw","Flat","",3,"","","","","","","","","true","true","false","false","false","","5L kit, 10L kit","","",5,15,500,"","","","","","","","","2 hrs","24 hrs","24 hours","Must sand","","","","","A.Y.B.","Intermediate","Epoxy",0,"June, 04 2004 00:00:00 +1200","","G Moran","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","5L kit, 10L kit",""],[182,"AY&B Epoxy Primer ","Altex Epoxy Primer provides the foundation for all high performance marine systems. Altex Epoxy Primer is suitable for a vast range of substrates, and ensures exceptional adhesion for all coating systems to build on.
\r\nAltex Epoxy Primer is recommended for use as:
Altex Epoxy Primer may also be used to seal off prepared, aged coatings prior to repainting - refer also to Altex Epoxy Barrier Undercoat.
\r\nAltex Epoxy Primer is ideal for use below the water-line as a tie coat between aged epoxies and Altex Yacht & Boat Antifoulings:
FEATURES:
\r\n\r\nAltex Epoxy Resin is a high quality general purpose marine grade epoxy resin. It is excellent for fairing, hand laminating with fibreglass / carbon / kevlar, encapsulation, wood construction, flooring, and as an adhesive for polyester laminates.
\r\n\r\nFEATURES:
\r\n\r\nAltex Epoxy Spot Filler 1:1 is a low density, solvent free, epoxy paste, formulated to cure at ambient temperatures, producing a filler that is suitable for spot filling in marine and industrial applications.
\r\nThe thixotropic nature of Epoxy Spot Filler 1:1 has been designed for good hold-up on vertical surfaces, with minimal sag even at elevated temperatures.
\r\nThis lightweight formulation is easy to sand, and will bond well to a variety of substrates including fibreglass, gelcoat, GRP and wood.
FEATURES:
\r\nAltex Epoxy TimberSealer can be used for a variety of marine applications:
\r\n\r\nAltex Epoxy TimberSealer should be considered for use particularly in areas of low air movement, cyclic humidity or areas inaccessible after construction.
\r\n\r\nHigh Build Sandable Undercoat
\r\n","","","","","","","","4:1","#12","",53,"","","","","","","","","","","","","","","","","true","true","true","false","true","","","","","","",100,"","","","","","","","","","","24 hours","5 days","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","true","","","false","true","","",""],[179,"AY&B MultiPurpose Primer ","Altex MultiPurpose Primer is a versatile single pack primer designed for use on many different substrates, both above and below the waterline.
\r\nIt may be used with confidence
\r\n\r\nFEATURES:
\r\nNo.10 Antifouling is recommended:
\r\n\r\nNo.10 Antifouling is:
\r\n\r\nContains No Organotin Compounds
\r\n\r\nDo NOT apply to aluminium alloy surfaces.
\r\n","Anti-fouling","","","Single Pack","",0,0,"N/A","#10","",46,1.899999976158,50,75,0,"White, Red, Medium Blue, Dark Blue, Black","","",0,"","","","","","","","","true","false","false","true","false","","1 and 4 litre","","",0,0,75,"","","","","","","","","1 hr","8 hr","4 hours","","","","","","A.Y.B.","Anti-Fouling","",0,"December, 01 2003 00:00:00 +1300","","A Webb","http://www.altexboatpaint.com/site/altexyacht/files/No10Antifouling.pdf","","","true","manufactured","true","true","false","false","false","true","","","false","true","","",""],[184,"AY&B No.3 Epoxy Primer Undercoat ","No.3 Epoxy Primer Undercoat is designed for use as:
\r\n\r\nFree sanding properties with easy de-dusting - does not clog production sand papers.
\r\n
\r\nNote: DO NOT sand with stearate coated sand papers as this could impair intercoat adhesion
No.4 Epoxy Sealer Undercoat is a professional grade primer ideally suited to lengthy new-build or repaint projects where different epoxy surfacers, undercoats and fairing compounds - of different ages - require to be sealed and prepared for final finishing.
\r\n\r\nIn repaint situations where areas of the same job may be spot-filled, have existing sanded polyurethane finish and / or sanded epoxy undercoat, No.4 Epoxy Sealer Undercoat provides an excellent one-step tie-coat and sealer prior to applying urethane finish coats.
\r\n\r\nNo.4 Epoxy Sealer Undercoat may be top-coated with acrylic or polyester urethane finishes and is especially formulated as a sealer under Elite Polyurethane, Elite Pro~Spray, and Boero Challenger HT finishes.
\r\n\r\nNo.4 Epoxy Sealer Undercoat is an excellent adhesion coat when applying a new finish over existing aged, and suitably prepared, polyester or acrylic urethane gloss coatings.
\r\n\r\nAltex No.5 Antifouling is recommended:
\r\n\r\nAltex No.5 Antifouling is:
\r\n\r\nNote: Because ablative antifoulings work by slowly wearing away to expose fresh biocides, the amount of product applied has a direct bearing on system life.
\r\n\r\nFeatures
\r\n\r\nContains No Organotin Compounds (TBT-Free)
\r\n\r\nAltex No.5 Antifouling is recommended:
\r\n\r\nAltex No.5 Antifouling is:
\r\n\r\nFEATURES:
\r\n\r\nIMPORTANT NOTE: Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs
","","4 hours","Data","","","","","N/A","#130","",52,"","","","","","","","","","","","","","","","","","","true","false","false","","","","","","",100,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","true","","true","false","true","false","true","true","false","","true","true","","4L, 10L","Aurora Red (4L only - while stocks last), Classic Black, Oyster White (4L only - while stocks last)"],[651,"AY&B No.5 AntifoulingNZ","Altex No.5 Antifouling is recommended:
\r\n\r\nAltex No.5 Antifouling is:
\r\n\r\nFEATURES:
\r\n\r\nIMPORTANT NOTE: Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs
","","4 hours","Data","","","","","N/A","#130","",52,"","","","","","","","","","","","","","","","","","","false","true","false","","4L, 10L (Aurora Red & Classic Black only)","","","","",100,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","true","","true","true","false","false","true","true","false","Aurora Red, Classic Black, Sea Green, Seaport Blue","true","true","","",""],[606,"AY&B No.5 PLUS Antifouling","Availability: Australia only
\r\n\r\nAY&B No.5 PLUS Antifouling is recommended:
\r\nAY&B No.5 PLUS Antifouling is:
\r\nFEATURES
\r\nIMPORTANT NOTE: Not suitable for use on aluminium craft, outboard motors, sail drives or stern legs
","","6 hours","Data","","","","","N/A","#12","",52,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",100,"","","","","","","","","","","6 hours","Data","","","","","","","","","","","","","","true","true","manufactured","true","false","true","false","true","true","false","","true","true","","4L, 10L","Black, Blue, Grey, Green, Mid Blue, Red"],[482,"AY&B Polyurethane Undercoat","Altex Polyurethane Undercoat is a high performance, sandable undercoat which exhibits a number of significant advantages over existing polyurethane undercoats.
\r\nBy combining new technology polyurethane binders, AY&B Polyurethane Undercoat features excellent build characteristics & superior water resistance, coupled with low temperature cure & extended pot life.
\r\nThe sanding qualities are second to none - providing both the DIY user and the Professional applicator with an optimised product for all new and maintenance repaint work.
FEATURES:
\r\nPrimaShield Antifouling Sealer is a quick drying, general purpose, below waterline primer designed to provide both exceptional water barrier and tie coat properties to a large range of substrates prior to applying antifouling
\r\nPrimaShield Antifouling Sealer is used for spot priming of exposed primers & undercoats during maintenance repaints of antifoulings. These spot applications ensure good adhesion of the antifouling to an aged substrate.
\r\nPrimaShield Antifouling Sealer is used on the following substrates:
FEATURES:
\r\n\r\nAvailability: New Zealand only
\r\nDesigned to be used in Altex Yacht & Boat Regatta Gloss Enamel to convert the film into a cross linked (2K) alkyd polymer.
\r\nAltex Regatta 2K Additive may also be used in AY&B Timbercote Varnish where multiple coats are required, to reduce time between coats.
FEATURES:
\r\nRegatta Gloss Enamel is designed for use as the finish coating for the Single Component Marine topsides systems.
\r\nRegatta Gloss Enamel can be used on :
FEATURES:
\r\n\r\nSite Mixed "Filling/Fairing" Mixture (ready to apply stage)
\r\n\r\nThe appropriate blend of Epoxy Resin and Microballoons, or General Purpose Thickener, ready to apply to the job.
\r\n\r\nRefere to AY&B Epoxy Resin and Ancillary Products Microballoons Data Sheets for more details.
\r\n\r\n\r\n","Epoxy Resin & Microballons","","","Two Pack","Single Pack",1,4,"4:1","#12","1/2",100,0,200,4000,"","Red","N/A","",0.20000000298,"","","","Epoxy Resin/ Microballons mixture for marine filling and fairing","","","May, 05 1995 00:00:00 +1200","","false","false","false","false","false","","N/A","","120 C dry","",5,0,"","","","","","","","","Data","Data","Data","Data","","","","","A.Y.B.","Intermediate","Epoxy","","","","","","","","false","imported","false","true","true","false","false","false","false","","true","true","","",""],[506,"AY&B Sea~Zone 60 Antifouling","
New technology Silyl Acrylate antifouling that offers superior self polishing performance.
\r\n\r\nOffering increased speeds, along with reduced fuel consumption, Sea~Zone 60 is designed to provide long term protection for hulls on sailing yachts, launches, and any ocean going pleasure craft.
\r\n","","9 hours","Open","","","","","N/a","#10","",55,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",75,"","","","","","","","","","","9 hours","Open","","","","","","","","","","","","","","","false","manufactured","true","true","false","false","false","true","","","false","true","","",""],[588,"AY&B Sea~Zone® 60 Antifouling","Availability: New Zealand only
\r\n\r\nSea~Zone 60 is a new generation Silyl Acrylate formulation that protects hulls from marine growth though a self polishing hydrolysis action. The patented silyl acrylate, cuprous oxide, and co-biocide combination provides outstanding protection that has exceeded side by side raft trials against traditional ablative cuprous oxide based formulations. Extensive testing has proven Sea~Zone 60 to be at the leading edge of antifouling technology.
\r\nSea~Zone 60 is the ideal antifouling coating for Pleasure craft of virtually any description, for use in a range of waters:
FEATURES:
\r\n\r\nAltex Surfacer Undercoat is designed for use in above water areas only.
\r\nIt can be used:
FEATURES:
\r\n\r\nTimbercote is a premium varnish designed for all marine bright work, including solid timber doors. It can be successfully applied to teak with proper de-oiling and is ideal for upgrading existing varnish systems. Timbercote can be used over timber sealed with Altex Epoxy Everseal or Altex Epoxy Resin.
\r\nFEATURES:
\r\n\r\nWater-borne caulking compound for Pyrocrete joints
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","false","true","false","false","true","","","false","true","","",""],[254,"Adfair Epoxy Fairing","A predispersed and pre packaged epoxy fairing compound from West Resins.
\r\n\r\n\r\n","","24 hours","","","","","","5:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","24 hours","","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","","","false","true","","",""],[24,"Ali-Etch Primer","Single Pack Aluminium Etch Primer","Vinyl Butyral/Phenolic","","","Single Pack","","","","N/A","N?19","",15,"",12,20,"","Red Oxide","Semi-Gloss","","","","","","Aluminium Primer","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","1 and 4 litre cans","","","","",15,"","","","","","","","","5 mins","20 min","1 hr","","","","","","Altex / ICI","Primer","Vinyl","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[27,"Alloy Anti-Fouling","Ablative Anti-Fouling for Aluminium Stern Drives etc.","Ablative Cu-free Antifoulnig","","","Single Pack","",0,0,"N/A","","1/2",44,1.259999990463,75,100,"","Black, Blue, Red, White","Low Sheen","","","","","","","","","","","true","true","false","false","false","","4 and 10 litre cans","","",27,"",100,"","","","","","","","","1 hr","6 hrs","5 hrs","","","","","","Altex","Anti-Fouling","",0,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[645,"Altex Flooring Resin","
A solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete. Can be used as for coving and patching when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information.
\r\n\r\nFEATURES:
\r\n\r\nAltex Repel Antifouling is recommended:
\r\n\r\nAltex Repel Antifouling is:
\r\n\r\nHigh build phenalkamine coating designed for LTC applied at high builds...
\r\n\r\nTrial product first released July 2018
\r\n","","90 mins","Data","","","","","5:1","#12","",70,"","","","","","","","","","","","","","","","","","","false","true","true","","12 litre","","","","",150,"","","","","","","","","","","45 mins","Extended","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","","Light Grey","false","true","","",""],[444,"Altex XP 2515 Red Antifouling","","","","","","","","","N/A","#10","",53,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[28,"Altra~Bond 3094","A two-component epoxy primer designed for use on aluminium sheets & extrusions, and galvanised substrates. Formulated with strontium chromate, which provides exceptional protection from filiform corrosion on aluminium surfaces.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","Epoxy","3 hours","24 hours","Two Pack","",1,1,"1:1","#12","",30,1.100000023842,15,25,585,"Pale Yellow (Transparent Yellow when applied)","Low Sheen","",12,"","","","2 pot Aluminium primer (=Awlgrip 30Y94)","","","August, 30 1994 00:00:00 +1200","September, 02 1998 00:00:00 +1200","true","true","false","false","false","","2L kit","","80 C dry",27,"",20,"","","","","","","","","15 min","1 hr","3 hours","24 hours","","","","","Altex / ICI","Primer","Epoxy","","","","","","","","false","manufactured","true","true","true","false","true","true","false","","true","true","","2L kit",""],[344,"Altra~Bond 3094-CF","
Altra~Bond® 3094-CF is a two component, chromate free epoxy primer utilising state of the art chrome & lead free anti-corrosive technology designed for use on aluminium structures, plate, extrusions and galvanised substrates.
\r\n\r\nAltra~Bond® 3094-CF is ideal as
\r\n\r\nAltra~Build® 520 is a high performance, sandable epoxy coating which is both corrosion and water resistant. It is an excellent build coat and when topcoated with E~Line®, it can be used in most industrial and marine situations.
\r\n\r\nAltra~Build® 520 is recommended:
\r\n\r\n\r\n","Epoxy Surfacer","","","Two Pack","",4,1,"4:1","#12","#5",49,1.509999990463,50,100,437,"Light grey","Semi-Gloss","",6,"","","","2 pot sandable epoxy build coat\r\nIMPORTANT INFORMATION = REFER TO GENERAL AREA OF APPLICATION","","","August, 30 1994 00:00:00 +1200","May, 28 1996 00:00:00 +1200","true","true","false","false","false","","1.25, 5 & 10 lt kits","","",38,15,75,"","","","","","","","","2 hrs","7 hrs","7 hours","48 hours","","","","","Altex / ICI","Primer","Epoxy","","","","","","","","true","","true","true","true","false","false","true","","","false","true","","",""],[30,"Altra~Build 535","Multi Purpose Epoxy Coating","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",68,1.350000023842,100,200,292,"Off White, Haze Grey","Low Sheen","",6,"","","AS 4020 Potable Water\r\nEPA for potable water\r\nSydney Water Corp. 95/00015","","","","","","true","true","false","false","false","","5 and 20 litre kits","","120 C dry",38,15,150,"3 hrs","18 hrs","12 hrs","1 wk","1 hr","12 hrs","8 hrs","1 wk","45 min","9 hrs","6 hrs","5 days","30 min","7 hrs","4 hrs","5 days","Altex","Intermediate","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[31,"Altra~Build 536","General Purpose Epoxy Coating","High Build Epoxy, Low Temp Cure","","","Two Pack","",4,1,"4:1","1/2","1/2",80,1.5,100,200,213,"Haze Grey, Off White, MIOX and Aluminium","Low Sheen","",6,"","","","","","","","","true","true","false","false","false","","1.25, 5 and 10 lt kits","","121?C dry",38,15,150,"0","0","0","0","0","0","0","0","4 hrs","8 hrs","4 hr","5 dy","0","0","0","0","Altex / ICI","Intermediate","Epoxy",0,"","September, 30 2002 00:00:00 +1200","A Webb","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[258,"Altra~Build 536 HAR","","","","","","","","","4:1","1/2","",77,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","6 hrs","36hrs","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[32,"Altra~Build 540","Epoxy Barrier Coating","Hydrophobic Epoxy Barrier Ctg","","","Two Pack","",4,1,"4:1","1/2","1/2",71,1.320000052452,100,200,"","White, Black, Haze Grey","Semi-Gloss","",6,"","","","","","","","","true","true","false","false","false","","5 and 10 litre kits","","120 C dry; 60 C immersed",38,15,150,"0","0","0","0","0","0","0","0","4 hrs","10 hrs","6 hrs","14 dys","0","0","0","0","Altex / ICI","Intermediate","Epoxy",0,"","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[33,"Altra~Etch","
Altra~Etch is a single pack etch primer, conforms to AS 3884 Type 1 and AS 3750.17 Type 1.
\r\nA single component, versatile etch primer suited to many light industrial and marine applications and may be top-coated with most finish coats. May be used as a pre-fabrication holding primer.
FEATURES:
\r\n\r\nA three component, solvent free high strength multi-purpose epoxy mortar.
\r\nCommonly used as a subfloor for resinous toppings where a high strength thin section screed is required. Can be laid to falls and feathered down to a minimum thickness of 1mm, maximum thickness of 50mm (in one application)
FEATURES:
\r\n\r\nA high-performance, multi-purpose flooring epoxy coating that is easy to apply. It’s ideal for use in many flooring environments such as workshops, warehouses, factories, washrooms etc.
\r\nAvailable in a variety of standard colours.
FEATURES:
\r\n\r\nA solvent-free, epoxy resin specifically formulated for use as a primer on porous concrete under Altra~Floor EF. Can be used as for coving when used in conjunction with select Altex Ancillary products – Contact Technical Services for further information.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","","12 hours","Data","","","","","1.74:1","N/A","",100,"","","","","","","","","","","","","","","","","","","false","true","true","","4.5L kit","","","","",150,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","","","","false","","true","true","true","false","true","true","false","","true","true","","",""],[286,"Altra~Lock 576","
A rapid dry/quick cure 100% solids penetrating epoxy sealer designed for use where less than ideal surface preparation is attainable or where surfaces have inherent porosity or surface weakness. It has a very low viscosity which allows it to wick into and bond porous substrates and residual rust into a tough epoxy composite. It may be applied to residual rust, degraded or new concrete, fibre-reinforced cement, and timber.
\r\n\r\nFEATURES:
\r\n\r\nAltra~Lock® 577 is designed for use as a surface sealer, conditioner and strengthener for porous substrates. It is especially useful in penetrating and saturating corroded surfaces where crevice corrosion cannot be treated by convention preparation methods.
\r\n\r\nMay be overcoated with a wide range of build and/or finsih coats.
\r\n\r\n\r\n\r\n
Altra~Lock® 577 may be applied to a wide variety of substrates such as:
\r\n\r\nResidual rust
\r\n\r\nDegraded or new concrete
\r\n\r\nFibre reinforced cement
\r\n\r\nAsbestos cement
\r\n\r\nTimbers
\r\n","Epoxy","8 hours","72 hours","Two Pack","",3,1,"3:1","N/A","N/A",100,1.019999980927,20,40,0,"Clear amber","\"Glaze\" when selaed","",6,"","","","","","","","","true","true","false","false","false","","1 and 4 litre kits","","120 C dry",38,15,40,"0","0","0","0","0","0","0","0","6 hrs","24 hrs","8 hours","72 hours","0","0","0","0","Altex / ICI","Sealer","Epoxy",0,"","","","http://www.altex.co.nz/uploads/AltraLock577.pdf","","","false","manufactured","true","true","true","false","false","false","false","","true","true","","",""],[259,"Altra~Max 500","","","","","","","","","2:1","10/90","",95,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",500,"","","","","","","","","","","8 hr","15dy","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[34,"Altra~Max UHBE","Ultra High-Build Epoxy Coating","Epoxy","","","Two Pack","",2,1,"2:1","10/90","",95,1.070000052452,800,2000,65,"Straw / beige","Low Sheen","",1,"","","","","","","","","true","true","false","false","false","","18 lt","","",27,5,1500,"","","","","","","","","4hr","18hr","12hr","15dy","","","","","Altex / ICI","Abrasion Resistant","Epoxy",0,"April, 19 2005 00:00:00 +1200","","A Webb","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[35,"Altra~Prime 504 (AU)","Non-inhibitive Epoxy Primer","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",55,0,50,75,423,"Buff - has been made in White and Light Grey","Flat","",12,"This product has now been superseded by Altra~Prime 504-50 in NZ","","","","","","April, 03 1997 00:00:00 +1200","","true","true","false","false","false","","","","120 C dry","",15,50,"","","","","","","","","2 hrs","3 hrs","2 hrs","","","","","","Altex / ICI","Primer","Epoxy","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[310,"Altra~Prime 504 (NZ)","","","","","","","","","4:1","1/2","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","2 hr","","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[36,"Altra~Prime 504-50","Polyamide Epoxy Anti-Corrosive Primer","Epoxy Primer","","","Two Pack","",4,1,"4:1","1/2","",50,1.330000042915,50,75,0,"Buff","Flat","",12,"","","","","","","","","true","true","false","false","false","","1.25, 5 and 10 lt kits","","120 C dry",0,15,50,"0","0","0","0","0","0","","","30 min","6 hrs","1.5 hrs","Data","0","0","0","0","Altex / ICI","Primer","Epoxy",0,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[37,"Altra~Prime 514-ZP","Altra~Prime® 514-ZP is a high performance, chemically cured epoxy primer, primarily for use on all steel, galvanised metal or aluminium surfaces. It is an excellent holding primer with superior aged re-coatability. It may be used for both interior and exterior applications.
\r\n\r\nAltra~Prime® 514-ZP Primer is the epoxy primer of choice on fabricated equipment requiring a durable, zinc free coating system, including:
\r\n\r\nAltra~Prime® 514-ZP may also be used on:
\r\n\r\nAltra~Shield® 2000 is a high performance, multi-purpose high build epoxy coating available in a wide range of tinted pastel colours.
\r\n\r\nAltra~Shield® 2000 is recommended for use:
\r\n\r\nAltra~Shield® 2024 is a high performance, hard wearing two-component high build epoxy ideally suited for use on industrial structures, fabricated equipment and industrial flooring.
\r\n\r\nAltra~Shield® 2024 is ideally suited:
\r\n\r\n\r\n","","5 hours","4 days","","","","","1:1","#12","",60,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","4 hours","30 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","true","","","false","true","","",""],[267,"Altra~Shield 546QC","","","","","","","","","2:1","X-100","",70,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","2 hrs","1 day","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[207,"Altra~Shield WB Epoxy Gloss","
Altra~Shield® WB finishes are high performance, two-package, chemically-cured waterborne gloss or semi-gloss epoxy coatings for use as hard, durable high performance architectural coatings.
\r\n\r\n\r\n\r\n
Altra~Shield® WB finishes feature easy application by brush, roller or spray, low VOC, high flash point, lower odour than solvent-based epoxies, and a hard, tough, stain-resistant finish.
\r\n\r\n\r\n\r\n
Typical Uses:
\r\n\r\nUse on interior properly prepared poured concrete, concrete block, plasterboard, metal and wood. Ideal for hard usage areas of schools, hospitals, restaurants, public buildings and factories.
\r\n\r\n\r\n\r\n
\r\n","Waterborne Epoxy finish","N/a","N/a","Two Pack","",1,1,"1:1","Water","",45,1.230000019073,50,125,200,"Tints available in Medium & Deep Bases","Semi-Gloss","",6,"","","","","","","","","true","true","false","false","false","","2 US gallon kits","Do not freeze","120 C dry",96,40,75,"No","No","No","No","4 hrs","12 hrs","24 hrs","1 wk","3 hrs","6 hrs","12 hours","1 week","2 hrs","4 hrs","12 hrs","1 wk","Altex / ICI","Finish","Epoxy","","","","","","","","false","manufactured","true","true","true","false","false","true","","","false","true","","",""],[209,"Altra~Shield WB Epoxy Semi-Gloss","
Altra~Shield® WB finishes are high performance, two-package, chemically-cured waterborne gloss or semi-gloss epoxy coatings for use as hard, durable high performance architectural coatings.
\r\n\r\n\r\n\r\n
Altra~Shield® WB finishes feature easy application by brush, roller or spray, low VOC, high flash point, lower odour than solvent-based epoxies, and a hard, tough, stain-resistant finish.
\r\n\r\n\r\n\r\n
Typical Uses:
\r\n\r\nUse on interior properly prepared poured concrete, concrete block, plasterboard, metal and wood. Ideal for hard usage areas of schools, hospitals, restaurants, public buildings and factories.
\r\n\r\n\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n","Waterborne Epoxy finish","N/a","N/a","Two Pack","",1,1,"1:1","Water","",45,1.230000019073,50,125,200,"Tints available in Medium & Deep Bases","Semi-Gloss","",6,"","","","Waterborne epoxy polyamide finish coat","","","March, 23 1999 00:00:00 +1200","","true","true","false","false","false","","2 US gallon kits","Do not freeze","120 C dry",96,40,75,"No","No","No","No","4 hrs","12 hrs","24 hrs","1 wk","3 hrs","6 hrs","12 hours","1 week","2 hrs","4 hrs","12 hrs","1 wk","Altex / ICI","Finish","Epoxy","","","","","","","","false","","true","true","true","false","false","true","","","false","true","","",""],[208,"Altra~Shield WB Primer","
Water-Borne Epoxy Primer
\r\n","Water-Borne Epoxy Primer","","","Two Pack","",4,1,"4:1","Water","",47,1.370000004768,50,75,193,"Light Grey","Flat","",8,"","","","Waterborne epoxy polyamide primer","","","March, 23 1999 00:00:00 +1200","","true","true","false","false","false","","1 (and 5) US gallon kits","Do not freeze","120 C dry",93,30,75,"No","No","No","No","4 hrs","12 hrs","12 hrs","1 wk","3 hrs","6 hrs","12 hours","1 week","2 hrs","4 hrs","12 hrs","1 wk","Altex / ICI","Primer","Epoxy","","","","","","","","false","","true","true","true","false","false","true","","","false","true","","",""],[435,"Altra~Shield WB-V Primer Finish","Made to Order or imported lines subject to availability.
\r\n\r\nA two-pack low VOC, waterborne epoxy gloss finish. The cured film is non-yellowing with high surface hardness and excellent flexibility. It exhibits excellent adhesion and water resistance and is tolerant of application over damp surfaces. It has excellent solvent resistance which makes it very resistant to graffiti. Self-priming over concrete, plaster, and fibre cement substrates.
\r\nRecommended for interior use or in-service conditions not directly exposed to extended periods of sunlight.
\r\nThe low VOC and exceptionally low odour makes it an ideal coating for food process areas, hygiene areas and laboratories.
FEATURES:
\r\n\r\nAltra~Tar® may be used in all Industrial & Marine applications where coal tar epoxy coatings are traditionally specified.
\r\n\r\nMarine & Immersion Service
\r\n\r\nHigh performance, two component, reinforced epoxy zinc-rich primer designed for use as a cathodic primer for protecting steel exposed to a variety of environments.
\r\n\r\nFEATURES:
\r\n\r\nAlkyd Aluminium Finish
\r\n","Alkyd","16 hours","5 days","Single Pack","","","","N/A","T48","T48",41,0,24,40,"","Aluminium","Bright Spangle","","","","","","","","","March, 23 1995 00:00:00 +1200","","true","true","false","true","false","","4","","105 C dry",38,"",30,"","","","","","","","","4 hrs","8 hrs","16 hours","10 days","","","","","Altex / ICI","Finish","Alkyd","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[487,"C-Flex 1-2-3 AF","","","6 hours","","","","","","N/A","#236E","",55,"","","","","","","","","","","","","","","","","false","false","false","false","false","","","","","","",100,"","","","","","","","","","","6 hours","","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[493,"C50 Surface Cleaner","C50 Surface Cleaner is a specialised solvent borne cleaner designed for the following uses:
\r\n\r\n
\r\n","","","","","","","","N/A","","",0,"","","","","","","","","","","","","","","","","true","true","false","true","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","",""],[422,"Carbocrete 522","Made to Order or imported lines subject to availability.
\r\n\r\nFibre Reinforced Cementitious Mortar
\r\n\r\nA spray-grade, economical, shrinkage-compensated, repair mortar, and surfacing compound that exhibits excellent bond strength to concrete. It is ideally suited for substrate resurfacing of deteriorated concrete and is typically topcoated with Carboline’s lining systems. Various lining systems are available. Each system provides excellent corrosion protection against targeted exposures, especially to acid attack due to wet hydrogen sulfide environment found in wastewater
\r\n","","","","","","","","N/A","Water","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","22.7kg bag","","","","",12000,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","","true","true","true","false","true","true","false","","false","true","","22.7kg bag",""],[639,"Carbocrylic 3357 HB","A high build waterborne acrylic with excellent weatherability and corrosion resistance when coupled with the appropriate primer.
\r\n","","4 hours","Data","","","","","N/A","Water","",42,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",100,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","","false","true","","",""],[564,"Carbocrylic 3359","","","","","","","","","N/A","Water","",46,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",38,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","false","false","false","","true","true","","",""],[355,"Carbocrylic 3359","Versatile high performance waterborne acrylic finish with excellent corrosion resistance and exterior weathering properties, as well as suitability for interior and mild environments
\r\n\r\nDense, highly impermeable glass flake-filled coating used for protecting steel and concrete.
\r\nThis versatile coating provides an impenetrable film for severe exposures in marine, offshore,
\r\npetrochemical, pulp and paper and other aggressive environments. Optional use of light or course
\r\ngrit fillers provides nonskid properties.
Penetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats. Some recommended uses of 1340 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms.
\r\n\r\nFEATURES:
\r\n\r\nPenetrating primer/sealer for use on concrete substrates and Carboline Pyrocrete Fireproofing products. It performs extremely well in sealing cementitious surfaces and is designed to receive a variety of different generic types of finish coats.
\r\n\r\nSome recommended uses of 13402:1 include the use as a curing compound or form release agent. When applied to “green” concrete it will retard the escape of moisture during the cure period. It is also excellent for use as a form release coating on plywood or steel forms. Meets the requirements of ASTM C309 when applied at 125-250 microns wet.
\r\n\r\nVOC compliant to current AIM regulations
\r\n","","4 hours","12 hours","","","","","2:1","N/A","",60,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",40,"","","","","","","","","","","3 hours","12 hours","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","true","","","false","true","","",""],[484,"Carboguard 1340N","","","","","","","","","1:1","#76","",98,"","","","","","","","","","","","","","","","","false","true","false","false","false","","","","","","",40,"","","","","","","","","","","12 hours","14 days","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","true","","","false","true","","",""],[318,"Carboguard 2929","Fast cure isocyanate-free epoxy-acrylic gloss coating for industrial and marine and off-shore applications where use of polyurethane coatings is banned or undesirable.
\r\n\r\nFEATURES:
\r\n\r\n** metallic colours are not gloss and gloss level may be colour dependent
\r\n","","24 hours","Data","","","","","4:1","#25","",44,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1.25L kit (White only), 5L kit","","","","",50,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","true","true","true","White, Black","true","true","","5L kit","White, Silver Aluminium"],[333,"Carboguard 504","A high performance, immersion grade (fresh & salt water) chemically cured epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
\r\n\r\nFEATURES:
\r\n\r\nAvailability: Australia only
\r\n\r\nA high performance, immersion grade (fresh & salt water) chemically cured, zinc phosphate epoxy primer. Suitable for use over suitably prepared mild steel, galvanised steel, other non-ferrous metals, and most GRP substrates.
\r\n\r\nFEATURES:
\r\n\r\nCarboguard® 504 is an inert non-inhibitive anti-corrosive modified polyamide cured epoxy primer.
\r\n\r\n\r\n","","5 hours","Extended","","","","","4:1","#25","",43,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",10,"","","","","","","","","","","5 hours","Extended","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","","true","true","","",""],[402,"Carboguard 510 (Trowel Grade)","
An economical trowelable, waterborne epoxy patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for patching spalled concrete and masonry wall surfacing to accept subsequent topcoats. Carboguard 510 repairs damaged concrete, fills large cracks, and can be used as a coving and sloping material for floor-wall transitions.
\r\n\r\nTopcoated with Carboline’s lining systems provides protection from acid attack from H2S or MIC
\r\n","","24 hours","7 days","","","","","1:2","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","12 hours","7 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","","false","true","","",""],[401,"Carboguard 510 SG","Made to Order or imported lines subject to availability.
\r\n\r\nA spray-grade, economical, epoxy-based repair mortar, patching and surfacing compound that exhibits excellent bond strength to concrete and other masonry surfaces. It is ideally suited for resurfacing deteriorated concrete in wastewater environment. Topcoated with Carboline’s lining systems provides protection from acid attack from H2S or MIC. Unique spraygrade (SG) formulation speeds application properties for quick turnaround projects.
\r\n\r\nFEATURES:
\r\n\r\nAn all-purpose immersion-grade epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. Suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. May also be used for immersion in fresh or salt water (marine) exposures.
\r\n\r\nFEATURES:
\r\n\r\nAn all-purpose epoxy that has a variety of attributes including low-temperature cure, surface tolerance, fast recoat times, moisture tolerance during application and cure, and excellent corrosion protection. Carboguard 635 HAR can be used direct to metal as a corrosion resistant primer or as an intermediate coating over other primers. It is suitable for both maintenance and new construction projects due to its excellent surface wetting characteristics and quick cure for handling. It may also be used for immersion in fresh or salt water (marine) exposures and exhibits exceptional abrasion resistance & toughness.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nHigh performance immersion grade epoxy that is designed as a liner for potable water tanks. This coating exhibits moisture tolerance during application, low temperature cure capability, and fast cure response for quick return to service. Product is self-priming on steel and is normally applied in two coats. Formulated for application at 120 to 180 microns DFT per coat for potable use.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","","6 hours","5 days","","","","","4:1","#10","",80,"","","","","","","","","","","","","","","","","true","false","false","false","false","","10L kit","","","","",150,"","","","","","","","","","","3 hours","14 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","true","true","false","Potable Light Grey","true","true","","10L kit","Potable Light Grey"],[625,"Carboguard 636 XT","
A multi-purpose, advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility.
\r\n\r\nFEATURES:
\r\n\r\nA glass-flake filled, multi-purpose,advanced technology coating suited to marine and industrial applications. Suitable for atmospheric and many immersion exposures. The DTM properties make it a versatile coating in maintenance and new work applications. Syntactic foam modification gives it unique thermal shock resistance and flexibility. Glass flake reinforcement enhances film strength, impact resistance and barrier properties.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nAn ideal high performance, high build coating for any service or structure, marine or industrial, where water or corrosion resistance is required.
\r\nHas excellent proven long-term service case histories for marine hull externals, above & below water, and as a lining for hydro penstocks, gates, and similar permanently immersed structures.
\r\nCarboguard 640 is the barrier coating of choice under Sea~Barrier 1000 and 3000 antifoulings.
FEATURES:
\r\n\r\nHigh performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service.
\r\n\r\nFood Processing
\r\n\r\nNZ AsureQuality assessed & passed for food/beverage including dairy farm & factory non-incidental contact. Ref: H3108
\r\n\r\n\r\n\r\n
Potable Water Approval – AS 4020:2005
\r\n\r\nAustralian Water Quality Centre
\r\n\r\nCarboguard 690 White* Reference: 130243-2009-CSR-1
\r\n\r\nCarboguard 690 N53 Bl/Gr* Reference: 130243-2009-CSR-2
\r\n\r\nAMS Laboratories
\r\n\r\nCarboguard 690 N35 Lt. Gr* Reference: AMS 1316537A
\r\n","","4 hours","5 days","","","","","4:1","#2","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5L, 10L","","","","",175,"","","","","","","","","","","2 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","true","Black, MIOX, Aluminium,White,N53 Blue Grey","true","true","","",""],[376,"Carboguard 690 GF","Phenalkamine Epoxy with Glass Flake Additive to increase chemical, abrasion & thermal shock resistance
\r\n\r\nHigh performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. Can be used on structural steel, piping, tankage, and equipment exposed to industrial or marine environments.
\r\n\r\nIt can also be used in immersion service for salt water, process water (non-potable) and waste water treatment projects
\r\n\r\nAvailable in a range of standard and tintable colours.
\r\n","","4 hours","5 days","","","","","4:1 ","#2","",82,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","2 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[607,"Carboguard 690 H","Highly chemical resistant epoxy with specialized application in hyperbaric chambers for the US Navy and other users. The product is self-priming and is most often used as a two-coat lining system. The product is an immersion-grade formula for water, seawater and other exposures
\r\n","","8 Hours","24 Hours","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",150,"","","","","","","","","","","4 hours","24 hours","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[608,"Carboguard 690 H","Highly chemical resistant epoxy with specialized application in hyperbaric chambers for the US Navy and other users. The product is self-priming and is most often used as a two-coat lining system. The product is an immersion-grade formula for water, seawater and other exposures
\r\n","","8 Hours","24 Hours","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",150,"","","","","","","","","","","4 hours","24 hours","","","","","","","","","","","","","","","false","imported","false","false","false","false","false","false","","","false","true","","",""],[416,"Carboguard 690 NS Coarse","","","10 hours","5 days","","","","","4:1:1","#2","",84,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",450,"","","","","","","","","","","4 hours","15 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","false","true","","",""],[417,"Carboguard 690 NS Medium","","","10 hours","5 days","","","","","4:1:1","#2","",84,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",250,"","","","","","","","","","","5 hours","15 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","false","true","","",""],[421,"Carboguard 690 Non-Skid","Phenalkamine Epoxy with Non-Skid Additive
\r\n\r\nHigh performance, surface tolerant epoxy that has excellent resistance to water and wastewater exposures. This coating exhibits outstanding moisture tolerance during application, low temperature cure capability, and very fast cure response for quick return to service.
\r\n\r\nCan be used as required on decks, walkways etc exposed to industrial or marine environments. It can also be used in splash & immersion service in salt water, process water (non-potable) and waste water treatment projects.
\r\n\r\nTwo grades of Non Skid Particles (Medium & Coarse) are available.
\r\n","","10 hour","5 days","","","","","4:1:1","#2","",84,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",300,"","","","","","","","","","","5 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","","false","true","","",""],[451,"Carboguard 691","","","","","","","","","1:4","#2","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","2 hours","10 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[343,"Carboguard 695 CLR","Made to Order or imported lines subject to availability.
\r\n\r\nCarboguard 695 CLR is a solventless, clear, epoxy lining that can be applied using reinforced mat specifically designed to comply with API RP652** for thick-film tank bottom lining repairs. It is suitable for exposures in water, crude oil, aromatic distillates, and unblended gasolines.
\r\n\r\nIt is suitable for exposures in water, crude oil, aromatic distillates, and unblended gasolines. It can be applied by standard or plural-component airless spray equipment
\r\n\r\nNZ ONLY: Carboguard 695 CLR can only be supplied to and used by a 'Certified Handler' - Consult Altex Coatings for further information.
\r\n","","10 hours","Data","","","","","3:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","3.78L (Clear Only)","","","","",600,"","","","","","","","","","","Data"," Data","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","Clear (MTO)","false","true","","",""],[304,"Carboguard 695 PM","Made to Order or imported lines subject to availability. Certified handlers only.
\r\n\r\nCarboguard 695 PM is a solventless, epoxy surfacer or patching mortar that is used to:
\r\n\r\nFuel & Other Tanks: Transition between floor-wall chine areas, lapwelded plates, rivets, etc. It is typically used with a reinforced mat system specifically designed to comply with API RP652 for thick-film tank bottom lining repairs.
\r\n\r\nIt is suitable for exposures in water, crude oil, aromatic distillates, and unblended gasolines. It is typically applied by broadknife, spatula, trowel, brush, or other suitable tool that allows heavy applications and smoothing procedures.
\r\n\r\nExcellent surfacer / patching mortar for concrete tanks & floors. Provides a rapid return to service screed for repairing flooring in high chemical exposure industrial environments.
\r\n","","12 hours","2 days","","","","","3:1:2","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5.67L","","","","",1000,"","","","","","","","","","","8 hours","7 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","Clear to Pale Olive-Grey","false","true","","",""],[380,"Carboguard 696 HBE","Made to Order or imported lines subject to availability.
\r\n\r\nSuitable for single coat applications in areas such as a penstock lining at film thicknesses ranging between 400 and 1500 microns. Suitable for service in various immersion environments including industrial wastewater, slurry tanks, sea or fresh water, on buried structures, and on high wear surfaces in atmospheric exposure.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","","12 hours","5 days","","","","","2:1","#109","",95,"","","","","","","","","","","","","","","","","true","true","false","false","false","","9L kit","","","","",500,"","","","","","","","","","","12 hours","30 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","true","true","false","","true","true","","9L kit",""],[349,"Carboguard 696 UHBE","
Carboguard® 696 UHBE is a phenalkamine cured, high solids, syntactic foam modified high build epoxy coating.
\r\n\r\nCarboguard® 696 UHBE is designed for application to system film thicknesses typically ranging from 800 microns to 3 millimetres (3000 microns).
\r\n\r\nEasy application qualities using properly set up standard heavy-duty airless spray equipment
\r\n","","12 hours","5 days","","","","","2:1","#109","",95,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1500,"","","","","","","","","","","12 hours","10 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[486,"Carboguard 838 (formally Carboguard 808)","High build intermediate and finish coating with
\r\nexcellent physical properties and good all around
\r\nchemical resistance. This material provides very
\r\ngood adhesion and better tolerance of field
\r\napplication variables than other type of coatings.
Low-temperature and rapid curing primer/finish with an extended recoat window. Provides excellent corrosion resistance as a primer, intermediate or finish on steel substrates. Self-priming on steel, galvanized steel and concrete, 888 offers user-friendly characteristics which facilitate application in a wide range of environmental conditions
\r\n\r\nMeets the requirements of Class "A" slip coefficient and creep testing criteria for use on faying surfaces
\r\n","","","","","","","","1:1","#33","",63,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","4 hours","1 year","","","","","","","","","","","","","","","false","","false","true","true","false","false","true","","","false","true","","",""],[317,"Carboguard 890","Highly chemical resistant epoxy mastic coating with exceptionally versatile uses in all industrial markets. Self-priming and suitable for application over most existing coatings, and tightly adherent to rust. Serves as stand-alone system for a variety of chemical environments and is also designed for various immersion conditions
\r\n\r\n\r\n","","8 hours","3 months","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","4 hours","3 months","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","","false","true","","",""],[356,"Carboguard 890 GF","
Cycloaliphatic Amine Epoxy with Glass Reinforcement
\r\n\r\nA glass reinforced chemically resistant epoxy coating with wide versatility in all industrial markets. Glass reinforcement improves internal film strength, hardness, impact, and abrasion resistance. It is often used in severe service (above or below the water line) in marine applications where these resistance qualities are desired
\r\n\r\n\r\n","","8 hours","5 days","","","","","Data","#2","",77,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","8 hours","15 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","","false","true","","",""],[609,"Carboguard 890H","
Highly chemical resistant epoxy with specialized application in hyperbaric chambers for the US Navy and other users. The product is self-priming and is most often used as a two-coat lining system. The product is an immersion-grade formula for water, seawater and other exposures
\r\n","","8 Hours","24 Hours","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",150,"","","","","","","","","","","4 hours","24 hours","","","","","","","","","","","","","","","false","imported","false","false","false","false","false","false","","","false","true","","",""],[485,"Carboguard 890N","","","","","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","false","true","false","false","false","","","","","","",150,"","","","","","","","","","","4 hours","24 hours","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","true","","","false","true","","",""],[362,"Carboguard 891","","","","","","","","","1:1","#2","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","4 hours","10 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","false","true","","",""],[358,"Carboguard 893","High solids corrosion resistant primer and intermediate. Used either as a primer or an intermediate coat over steel and inorganic zinc primers. Can be topcoated with a broad variety of high performance finish coats
\r\n","","8 hours","90 days","","","","","1:1","#2","",77,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","8 hours","30 days","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","","false","true","","",""],[354,"Carboguard 893 SG","","","7 hours","12 months","","","","","1:1","#10","",62,"","","","","","","","","","","","","","","","","true","true","true","false","false","","","","","","",100,"","","","","","","","","","","7 hours","12 months","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[308,"Carboguard 954 HB","","","","","","","","","1:1","#2","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","24 hours","60 days","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[658,"Carboguard AQP NC","Carboguard AQP is a cost-effective abrasion resistant coating with basis of epoxy resin. Corrosion protection system of steel surfaces above and under water. Import only product
\r\n","","","","","","","","1:1","none","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","3L kit (1.5L part A, 1.5L part B)","","","","",350,"","","","","","","","","","","2 hours","42 hours","","","","","","","","","","","","","","","false","manufactured","true","true","false","false","false","false","false","White and Tankers Green","false","true","","",""],[634,"Carboguard SC Primer LT","Carboguard SC Primer LT is an excellent general purpose low-temperature corrosion primer with
\r\ngood resistance to salts, water and alkalies. Also resistant to splash and spillage from mild acids
\r\nand solvents. The cured film is tough and abrasion resistant.
Carbomastic 18 BT is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile list of uses in marine and other corrosive environments. It is an excellent choice for the protection of ship hull exteriors, underwater and ballast tanks.
\r\n\r\nOffshore applications include sub-sea, jackets, production decks, drilling rig legs, pontoons, in immersed surfaces.
\r\n\r\nIt meets the demands in the IMO Performance Standard for Protective Coatings.
\r\n\r\nIt is classified “B1” (Superior Grade) under DNV standard “Testing and Classification of Ballast Tank Coatings”. It is type approved by ABS for ballast tanks and double bottom spaces
\r\n","","N/a","N/a","","","","","1:1","#10","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","8 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","true","","","false","true","","",""],[632,"Carbomastic 18 FC","This epoxy is a fast-curing, heavy-duty, high-build anti-corrosive coating with a broad and versatile
\r\nlist of uses in marine and other corrosive environments. It is an excellent choice for the protection
\r\nof ship hull exteriors, underwater and ballast tanks. Offshore applications include splash zone, subsea,
\r\njackets, production decks, drilling rig legs and pontoons in immersed exposures.
Aluminum-pigmented, low temperature curing mastic designed for cold weather applications down
\r\nto 0 °F (-18 °C). This unique coating provides excellent corrosion resistance over existing finishes
\r\nand rusted or SSPC-SP2 or SP3- cleaned steel.
High performance epoxy that has excellent resistance to fresh and salt water exposures. This coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. It contains an inert flake reinforcement (micaceous iron oxide) to enhance film strength and performance. This product is ideal for industrial or heavy duty marine environments for the protection of steel against salt laden environments.
\r\n\r\nFEATURES:
\r\n\r\n\r\n","","4 hours","24 hours","","","","","4:1","#2","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1.25L kit, 5L kit, 10L kit","","","","",150,"","","","","","","","","","","2 hours","15 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","true","true","false","MIOX, Aluminium Grey","true","true","","5L kit, 10L kit","MIOX, Aluminium Grey"],[406,"Carbomastic 615 Aluminium Grey","
This high performance epoxy coating exhibits outstanding moisture and surface tolerance during application, low temperature cure capability, and very fast cure response for quick return to service. This makes Carbomastic 615 eminently suitable for maintenance repaint work in marginal conditions and where surface preparation is less than ideal.
\r\n\r\nIt contains an inert flake reinforcement (micaceous iron oxide as well as Aluminium flake) to enhance film strength and performance.
\r\n\r\nSuitable for immersion service in fresh or salt water after 60 minute cure @ 24°C
\r\n","","4 hours","10 days","","","","","4:1","#2","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5L, 10L","","","","",150,"","","","","","","","","","","2 hours","15 day","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","Aluminium Grey","false","true","","",""],[605,"Carboquick 200","This fast cure high build polyaspartic coating provides excellent corrosion protection as well as long term weatherability in just one coat. It can be applied direct to metal (DTM) at 150 to 250 microns dry film thickness (DFT) to eliminate the need for typical primers and/or intermediate coats.
\r\nThis significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. If even better corrosion protection is desired it can be applied over our time proven Carbozinc or Carboguard primers.
FEATURES:
\r\n\r\nThin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets including marine exposure where ultra durable colours are desired. Carbothane 130 Clear Coat provides a smooth, high gloss durable finish that provides superior resistance to colour fade of basecoats.
\r\n\r\nFEATURES:
\r\n\r\nA specialised low solar absorbing high build, low sheen finish that has excellent resistance to
\r\ncorrosion and very good weathering performance, designed for use in all areas above the waterline
\r\nin marine exposure with indefinite self-recoat to reduce maintenance time and cost.
\r\nFeatures
\r\n• Outstanding performance properties in both mild and aggressive environments
\r\n• Low solar absorbing to reduce thermal transference and internal operating temperatures of vessels
\r\n• Application by spray, brush, or roller
\r\n• Indefinite recoatability
\r\n• Low HAPs content
An aliphatic acrylic-polyester polyurethane, high build, low sheen finish that has excellent resistance to corrosion, hemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colors.
\r\n\r\nFeatures
\r\n\r\n• Outstanding performance properties in both mild
\r\nand aggressive environments
\r\n• High build; suitable for many two-coat systems
\r\n• Suitable for application direct to inorganic zincs
\r\n• Application by spray, brush or roller
\r\n• Indefinite recoatability
\r\n• VOC compliant to current AIM regulations
High build, low sheen finish that has excellent resistance to corrosion, chemicals and abrasion. Suitable for application over a number of Carboline primers and intermediates, this material provides very good weathering performance in a broad range of colours
\r\n\r\nFEATURES:
\r\nHigh solids, high build, weatherable coating that provides a tough attractive finish while exhibiting
\r\noutstanding performance properties. Demonstrates extremely good resistance to abrasion,
\r\ncorrosion and chemical exposure when applied over recommended Carboline primers and/or
\r\nintermediate coats.
Thin film, high gloss finish with exceptional weathering performance characteristics. Used extensively in virtually all industrial markets, Carbothane 134 HG provides a smooth, durable finish that has superior resistance to corrosion, abrasion and chemical exposure.
\r\n\r\nFEATURES:
\r\n\r\nCarbothane® 949AZ is an economical fast drying cross-linking modified acrylic gloss polyurethane finish suited to general purpose industrial use
\r\n\r\nCan be applied over aged alkyds without the usual lifting problems (test patch recommended)
\r\n\r\nAvailable Australia only
\r\n","","N/a","N/a","","","","","4:1","#25","",56,"","","","","","","","","","","","","","","","","true","true","true","false","false","","","","","","",50,"","","","","","","","","","","4 hr","Data","","","","","","","","","","","","","","","false","manufactured","false","true","true","false","false","true","","","false","true","","",""],[395,"Carbotherm 3300","Made to Order or imported lines subject to availability.
\r\nCarbotherm 3300 is a ceramic blend insulative composite coating formulated using a high temperature resistant acrylic binder.
\r\nIt is ideally suited as a protective heat barrier to shield personnel from hot surfaces. It also inhibits heat transfer into or out of a structure. Its insulative properties keep structures exposed to solar radiation significantly cooler. It can be used to minimize or eliminate sweating of pipes or other operating equipment
FEATURES:
\r\nInsulative epoxy coating
\r\n","","24 hours","5 days","","","","","16:1","N/A","",82,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","5 hours","5 days","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[320,"Carboweld 11","Made to Order or imported lines subject to availability.
\r\n\r\nA weldable pre-construction inorganic zinc primer for shop use only.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nCarboxane 2000 is an isocyanate-free, ultra-durable coating that provides outstanding colour and gloss retention as well as excellent corrosion protection for exterior exposures. When used over a suitable primer (as a two coat system) Carboxane 2000 provides the barrier, corrosion resistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy intermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up the painting process, saves labour, and saves money without sacrificing performance. This tightly cross-linked film utilises a UV-resistant siloxane binder resulting in a finish with excellent corrosion protection and weathering performance that far exceeds aliphatic polyurethanes.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nCarboxane 2000 Satin is a premium, ultra-durable coating that provides outstanding colour and\r\ngloss retention as well as excellent corrosion protection for exterior exposures. When used over\r\na suitable primer (as a two coat system) Carboxane 2000 Satin provides the barrier, corrosion\r\nresistance properties, and weatherability normally achieved with a three-coat system (primer, epoxy\r\nintermediate with an acrylic-polyurethane finish) for most environments. This significantly speeds up\r\nthe painting process, saves labour, and saves money without sacrificing performance.
\r\n\r\nFEATURES:
\r\n\r\nPremium, ultra-durable ambient cured finish meeting AAMA 2604 performance requirements. 950 VOC is a VOC-compliant coating that provides unparalleled color and gloss retention and exterior weathering characteristics. Available in gloss and satin finishes as well as metallic finishes with clear coats, 950 VOC offers a level of durability for field application previously not available in the construction industry. Also can be applied directly to aged PVDF finishes.
\r\n","","","","","","","","15:1","#214","",38,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1 Gallon kit, 3.2 Gallon kit","","","","",50,"","","","","","","","","","","3","20","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","true","","true","true","","",""],[274,"Carbozinc 11","Time-tested corrosion resistant primer that provides excellent corrosion protection to steel in some of the harshest environments. For over five decades, Carbozinc 11 has been the industry standard for high-performance inorganic zinc protection on steel structures worldwide.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nCarbozinc 11 WB is a water-based inorganic zinc rich primer that protects steel galvanically, eliminating subfilm corrosion. It meets VOC regulations while providing the proven performance of silicate zinc rich technology. It may be used as a primer under many different types of topcoats.
\r\n\r\nFEATURES:
\r\n\r\nA high performance, two component, organic zinc-filled primer specifically formulated to provide corrosion protection to steel surfaces in salt and weathering environments. It has good surface tolerant characteristics where steel surface preparation may be less than ideal. It may also be used for the repair of aged inorganic zinc-rich coatings or galvanised steel surfaces.
\r\n\r\nFEATURES:
\r\n\r\nNEW 4:1 Ratio
\r\n\r\nA high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in salt and weathering environments. This high performance primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
\r\n\r\nFEATURES:
\r\n\r\nA high-solids, zinc-filled epoxy primer for corrosion protection of structural steel in highly corrosive environments including offshore, marine and industrial. This low VOC, HAPs compliant primer has quick cure-to-topcoat characteristics for in-shop applications and quick turnaround capabilities for the field. It has excellent adhesion and undercutting resistance and is outstanding for use as a corrosion resistant primer for a variety of applications.
\r\n\r\nFEATURES:
\r\n\r\nLow VOC organic zinc epoxy steel primer with quick cure-to-topcoat characteristics for in-shop applications and quick turnaround requirements in the field. Carbozinc 858 has very good adhesion and undercutting resistance and is excellent for use as a corrosion resistant primer for a variety of applications
\r\n\r\n\r\n\r\n
A two-component, high solids, zinc rich epoxy primer formulated for the protection of properly prepared steel substrates. Carbozinc 859 EZ2 can be applied by conventional or airless spray. Recommended where a high performance, highly corrosion resistant zinc primer is desired. Typical applications include structural steel, tanks, piping, equipment and other miscellaneous parts in industrial or architectural projects.
\r\n\r\nFEATURES:
\r\n\r\nA single pack steel primer designed for use in industrial and marine applications
\r\n\r\nFEATURES:
\r\n\r\nSpecifically formulated to protect metal exposed to weather, water, or chemicals. Typically used for the protection of structural steel, tanks, pipes, equipment industries such as Pulp and Paper, Chemical Processing, Water and Waste Water, Refineries, Fertiliser Plants, Marine Installations, Bridges, and Power Projects.
\r\n","","N./A","N/A","","","","","N/A","#10","",42,"","","","","","","","","","","","","","","","","","","true","false","true","","10L ","","","","",100,"","","","","","","","","","","8 hours","Extended","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","Metallic Grey","false","true","","",""],[88,"Chem~Bar 900","Specifically formulated to protect metal or masonry surfaces exposed to weather, water or chemicals.
Chem~Bar 900 may be used to protect structural steel, tanks, pipes and equipment in the following:
FEATURES:
\r\nA specialised variant of the well-proven Chem~Bar 900. A high-performance aluminium-filled vinyl acrylic suitable for use as a general-purpose aluminium finish and for sealing thermal metal spray.
\r\n\r\nChem~Bar 900 Aluminium may be used in all atmospheric exposures where traditional aluminium finishes may be employed; including:
\r\nFEATURES:
\r\n\r\nD30 Degreaser/Dewaxer is designed to remove more persistent surface contamination-oils and grease in industrial environments, marine situations, as well as wax from finish coats on pleasure craft topcoat surfaces.
\r\n\r\nD30 Degreaser/Dewaxer is a more aggressive cleaner than the C50 Surface Cleaner.
\r\n","","","","","","","","N/A","","",0,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1L, 4L, 20L (NZ only)","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","1L,4L",""],[432,"Deck Grey Special PU","","","","","","","","","4:1","#25","",60,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","2 hours","24hrs","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[546,"Designer Flake - Natural Stone","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","false","false","true","true","false","","true","true","","",""],[90,"Devchem 253","Chemical Resistant Tank Lining","Novolac Epoxy","","","Two Pack","",4,1,"4:1","1/2","",72,1.389999985695,100,150,200,"Pastel Red, Pastel Blue, White","Semi-Gloss","",6,"","","","Epoxy tank lining","","","September, 02 1994 00:00:00 +1200","","true","true","false","false","false","","10 litre kits","","121 C dry",38,15,150,"","","","","","","","","","12 hrs","24 hrs","6 days","","","","","Altex / ICI","Tank Lining","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[91,"Devchem 257","High Performance Tank Lining","Epoxy Tank Lining","","","Two Pack","",4,1,"4:1","1/2","",74,1.549999952316,100,150,218,"Red, White","Semi-Gloss","",6,"","","","Novalac epoxy","","","December, 23 1996 00:00:00 +1300","","true","true","false","false","false","","10 litre kits","","120 C dry",38,15,125,"","","","","","","","","2 hrs","12 hrs","12 hrs","6 days","","","","","Altex / ICI","Tank Lining","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[94,"Devfloor 521","","100% Solventless epoxy","","","Two Pack","",2,1,"2:1","","X100",100,0,125,250,50,"","","",0.5,"","","","","","","","","true","true","false","false","false","","","","",0,0,125,"","","","","","","","","","24","12","24","","","","","Devoe Paint","","Epoxy",0,"August, 28 1994 00:00:00 +1200","","D Elder","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[95,"Devfloor 525","","100% Solventless epoxy","","","Two Pack","",2,1,"2:1","Data","Data",100,0,125,375,10,"See colour additive chart","Gloss","",0.330000013113,"","","","","","","","","true","true","false","false","false","","","","",0,0,125,"","","","","","","","","","24","12","24","","","","","Devoe Paint","","Epoxy",0,"December, 20 2006 00:00:00 +1300","","G Moran","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[96,"Devgrip 237","","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",66,0,150,"",0,"","","",0,"","","","","","","","","true","true","false","false","false","","","","",0,0,150,"","","","","","","","","","","7 hrs","5 days","","","","","Ameron","Intermediate","",0,"September, 13 1999 00:00:00 +1200","","D Elder","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[98,"Devgrip 238","Abrasion Resistant Epoxy","Epoxy","","","Two Pack","",4,1,"4:1","1/2","1/2",77,1.52999997139,200,250,206,"Grey and Red (Grey only Aussie)","Flat to Semi-gloss","",4,"","","","2 pot 'tough' epoxy","","","August, 30 1994 00:00:00 +1200","November, 25 1994 00:00:00 +1300","true","true","false","false","false","","5, 10 litre","24 months","121 deg C",27,15,200,"","","","","8","16","8","48","6 hrs","12 hrs","6 hrs","36 hrs","4","8","4","24","Altex / ICI","Abrasion Resistant","Epoxy","","","September, 01 2000 00:00:00 +1200","A Webb","","","","false","","false","true","false","false","false","true","","","false","true","","",""],[97,"Devguard 4160","Interior/Exterior Alkyd Primer","Alkyd Anti-Corrosive Primer","","","Single Pack","",0,0,"N/A","X100","",51,"",50,60,415,"Red, White","Flat","","","","","","","","","","","true","true","false","false","false","","1 US Gallon cans","","93 C dry",42,"",50,"","","","","","","","","30 min","45 min","2.5 hrs","","20 min","30 min","2 hrs","","Devoe Paint","Primer","Alkyd",0,"September, 02 1999 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[99,"Devmat 101","100% Solids Epoxy Tank Lining","100% Solids Epoxy Tank Lining","","","Two Pack","",2,1,"2:1","1/2","",100,1.299999952316,375,1000,10,"Light Grey","Medium-High Gloss","Tank rebuild, FR system",0.300000011921,"","","","","","","","","true","true","false","false","false","","200 litre kits","","120 C dry",93,0,500,"","","","","","","","","","24 hrs","16 hrs","24 hrs","","","","","ICI Devoe","Tank Lining","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[100,"Devmat 109","Tank Lining Primer for use with Devmat 111","Epoxy Holding Primer","","","Two Pack","",4,1,"4:1","1/2","",75,0.212999999523,75,100,213,"Haze Grey, Off White","Low sheen","Spray",4,"","","","","","","","","true","true","false","false","false","","5 and 10 litre","Cool dry conditions","121 in air",38,15,75,"","","","","3 hr","9 hr","5 hr","1 wk","3 hr","7 hr","4 hr","1 wk","","","","","ICI Devoe","Tank Lining","Epoxy",0,"December, 14 2000 00:00:00 +1300","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[101,"Devmat 111","100% Solids Epoxy Tank Lining","100% Solids Epoxy Tank Lining","","","Two Pack","",3,1,"3:1","1/2","",100,1.799999952316,200,6000,0,"Buff, Mist Grey","High Gloss","Tank rebuild, FR system",1.450000047684,"","","","100% solids epoxy tank lining","","","November, 29 1994 00:00:00 +1300","March, 28 1995 00:00:00 +1200","true","true","false","false","false","","4 and 16 litre kits","","120 C dry",93,0,200,"","","","","","","","","","24 hrs","16 hrs","24 hrs","","","","","ICI Devoe","Tank Lining","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[102,"Devran 101","100% Solids Epoxy Tank Coating","Phenolic epoxy tank lining","","","Two Pack","",2,1,"2:1","N/A","",100,1.299999952316,400,1000,10,"Light Grey","Medium / High","",0.300000011921,"","","","","","","","","true","true","false","false","false","","30 litre","","121C dry",93,0,500,"","","","","","","","","","18","10","Data","","","","","ICI Devoe","Tank Lining","Epoxy",0,"May, 06 2005 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[103,"Devran 122","100% solids self-levelling epoxy flooring coating","Epoxy Floor Coating","","","Two Pack","",3,1,"3:1","1/2","",100,1.55999994278,300,600,71,"Lt Grey","High gloss","",2,"","","","","","","","","true","true","false","false","false","","4 litre kits","","",0,0,500,"","","24 hrs","24 hrs","","","","","","20 hrs","12 hrs","24 hrs","","","","","Altex / ICI","Finish","Epoxy",0,"July, 31 2002 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[104,"Devran 133","100% solids Epoxy Potable Water Tank Lining","100% Solids Epoxy Tank Lining","","","Two Pack","",4,1,"4:1","1/2","",100,1.789999961853,150,250,71,"Off White, Pastel Blue","High Gloss","",3,"","","Approved to AS 4020 for use as a potable water tank lining","","","","July, 18 1996 00:00:00 +1200","","true","true","false","false","false","","5 and 10 litre kits","","120 C dry",93,10,200,"","","","","","","","","2 hrs","20 hrs","15 hrs","72 hrs","","","","","Altex / ICI","Tank Lining","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[105,"Devran 201","Non-Inhibitive Epoxy Primer","Epoxy Primer","","","Two Pack","",9,1,"9:1","1/2","",50,1.340000033379,50,76,432,"Buff","Flat","",12,"","","","2 pot general primer","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","4 and 10 litre kits","","120 C dry",27,15,50,"","","","","","","","","30 min","8 hrs","4 hrs","","","","","","Altex / ICI","Primer","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[106,"Devran 214","Tin Free Antifouling","Anti-Fouling","","","Single Pack","","","","N/A","1/2","",48,1.860000014305,75,100,438,"Blue, Red","Flat","","","Apply only to epoxy coatings before they have cured hard.\r\nDo not apply over ablative copolymer type antifoulings.","","","","","","","","true","true","false","false","false","","4 and 10 litre cans","","",27,"",100,"","","","","","","","","2 hrs","5 hrs","6 hrs","Data","","","4 hrs","","Altex / ICI","Anti-Fouling","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[107,"Devran 223","High Build Epoxy Coating","Polyamide Epoxy Coating","","","Two Pack","",1,1,"1:1","1/2","",70,1.629999995232,100,150,271,"Light Grey","Flat","",12,"","Long term (1 year) self recoatable epoxy primer. Also long term (1 year) recoatable with other epoxy coatings & long term (3 months) with urethanes.","","","","","","","true","true","false","false","false","","5 and 10 litre kits","","120 C dry","",15,150,"",">60 hrs","8 hrs","3 mths","","","","","","6 hrs","2 hrs","3 mths","","5 hrs","1 hr","3 mths","Altex / ICI","Intermediate","Epoxy","","July, 21 2004 00:00:00 +1200","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[108,"Devran 224","High Build Epoxy Coating","Polyamide Epoxy","","","Two Pack","",1,1,"1:1","1/2","",60,1.330000042915,100,150,"","White, Black, Lt Grey, Haze Grey","Semi-Gloss","",10,"","","","","","","","","true","true","false","false","false","","8 and 40 litre kits","","120 C dry",27,40,100,"","","16 hrs","","2 hrs","12 hrs","8 hrs","5 dys","1.5 hrs","8 hrs","6 hrs","5 days","1 hr","6 hrs","4 hrs","3 dys","ICI Devoe","Finish","Epoxy",0,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[109,"Devran 230","High Build Epoxy Coating","Hydrophobic Epoxy Coating","","","Two Pack","",4,1,"4:1","1/2","",71,1.320000052452,100,200,"","White, Black, Haze Grey","Semi-Gloss","",6,"","","","2 pot epoxy high build","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","5 and 10 litre kits","","120 C dry",38,15,150,"","","","","","","","","2 hrs","12 hrs","8 hrs","5 days","","","","","Altex / ICI","Intermediate","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[110,"Devran 261QC","Rapid Cure High Build Epoxy Coating","Epoxy Amine","","","Two Pack","",2,1,"2:1","X100","",70,1.409999966621,75,125,286,"Off White","Semi-Gloss","",1,"","","","","","","","","true","true","false","false","false","","6 litre kits","","","",0,125,"1hr","5hrs","3hrs","24hrs","","","","","30min","3hrs","2hrs","24hrs","","","","","Altex / ICI","Intermediate","Epoxy",0,"July, 17 2001 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[111,"Devran EZP","Epoxy Zinc Phosphate Primer","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",45,0,40,75,"","Buff (special order only)","Flat","",12,"","","","Epoxy Zinc Phosphate primer","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","5 and 10 litre kits","","120 C dry","",15,50,"","","","","","","","","30 min","4 hrs","4 hrs","Data","","","","","Altex / ICI","Primer","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[112,"Devshield 235","Multi Purpose Epoxy Coating","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",68,1.350000023842,100,200,292,"Off White, Haze Grey","Low Sheen","",6,"","","AS 4020 Potable Water\r\nEPA for potable water\r\nSydney Water Corp. 95/00015","High build epoxy","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","5 and 20 litre kits","","120 C dry",38,15,150,"3 hrs","18 hrs","12 hrs","1 wk","1 hr","12 hrs","8 hrs","1 wk","45 min","9 hrs","6 hrs","5 days","30 min","7 hrs","4 hrs","5 dys","ICI Devoe","Intermediate","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[113,"Devshield 235","Temp file for AS 4020 approval use","Epoxy","","","","",4,1,"4:1","1/2","",68,0,125,200,0,"","Low Sheen","",0,"","","","","","","","","true","true","false","false","false","","","","",0,0,150,"","","","","","","","","","9 hrs","6 hrs","3 dys","","","","","Altex / ICI","Tank Lining","Epoxy",0,"June, 14 2001 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[115,"Devtar 5A","Tar Free High Build Epoxy Coating","Epoxy","","","Two Pack","",4,1,"4:1","1/2","",71,1.30999994278,150,200,292,"Black","Semi-Gloss","",6,"","","","High build epoxy","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","10 litre kits","","120 C dry",38,15,150,"","","","","","","","","1 hr","12 hrs","6 hrs","5 days","","","","","Altex / ICI","Intermediate","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[116,"Devthane 349QC","Rapid Cure High Build Polyurethane","Polyurethane","","","Two Pack","",3,1,"3:1","#5","",71,0,100,225,0,"","Gloss","",0,"","","","","","","","","true","true","false","false","false","","","","",0,0,150,"","","","","","","","","45min","4hrs","4hrs","","","","","","ICI Devoe","Finish","Urethane",0,"April, 28 2004 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[117,"Devthane 359 HS","High Build Acrylic Urethane","Urethane","","","Two Pack","",4,1,"4:1","No.5","#5",70,1.679999947548,75,125,279,"White plus tint range","Semi-Gloss","",2.5,"","","","","","","","","true","true","false","false","false","","5 & 10 lt kits","","","",15,100,"","","","","","","","","3 hrs","6 hrs","4 hrs","3 days","","","","","Altex / ICI","Finish","Urethane","","November, 21 2000 00:00:00 +1300","","D Elder","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[118,"Devthane 369","","Polyurethane","","","Two Pack","",4,1,"4:1","#5","",56,0,50,75,0,"","","",0,"","","","","","","","","true","true","false","false","false","","","","",0,0,50,"","","","","","","","","","","","","","","","","Ameron","Finish","Urethane",0,"September, 13 1999 00:00:00 +1200","","D Elder","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[119,"Devthane 379","High Gloss Acrylic Urethane","Acrylic Urethane","","","Two Pack","",4,1,"4:1","No. 5","",60,1.269999980927,40,75,370,"White, Black plus full tint range","High Gloss","",6,"","","","","","","","","true","true","false","false","false","","1.25, 5 and 10 lt kits","","120 C dry",24,15,50,"","","","","","","","","3 hrs","6 hrs","4 hrs","24 hrs","","","","","Altex / ICI","Finish","Urethane","","November, 29 2000 00:00:00 +1300","","D Elder","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[120,"Dimetcote 302","Reinforced Inorganic Zinc","Reinforced Inorganic Zinc","","","Two Pack","",4,1,"4:1","T-10","",56,2.099999904633,50,100,"","Green","Flat","",10,"","","","","","","","","true","true","false","false","false","","5 and 10 litre kits","","Up to 205 C intermittent dry",27,15,75,"","","","","","","","","30 min","5 hrs","2 hrs","","","","","","Ameron","Zinc Rich Primer","Inorganic/Mod. Inorganic","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[429,"Du Pont Imron Elite","","","","","","","","","Data","Data","",40,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[420,"Du Pont LE HS Urethane Primer","","","","","","","","","Data","Data","",0,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",75,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[425,"DuPont Clear","","","","","","","","","","","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[257,"DuPont Metallic","","","","","","","","","Data","Data","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[655,"Dudick 27 Primer","","","3 hours","5 days","","","","","Data","N/A","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",75,"","","","","","","","","","","3 hours","5 days","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","","","true","true","","",""],[428,"Dupont LE PUR Undercoat","","","","","","","","","Data","Data","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[122,"Durofast Enamel","Durofast is an air drying, quality, gloss equipment enamel designed for use over suitably prepared and primed substrates. Durofast is based on a modified synthetic alkyd resin to provide good durability and weather resistance in mild industrial and commercial environments. Durofast Enamel can be applied over a variety of suitably primed and prepared surfaces. Products suitable as primers for Durofast include Duraprime HB and Altra~Etch®.
\r\n\r\nDurofast may also be used in maintenance repaint situations, where surfaces have been suitably prepared and primed.
\r\n\r\nDurofast Enamel is recommended for use on:
\r\n\r\n\r\n","Modified alkyd","N/a","N/a","Single Pack","",0,0,"N/A","X-100","",40,1.049999952316,25,40,"","Extensive custom range","High Gloss (Flat Black also)","","","","","","","","","","","true","true","true","false","false","","1, 4 and 20 litre cans","","> 90 C dry","","",40,"","","","","1 hr","6 hrs","6 hrs","","45 min","5 hrs","5 hrs","Data","30 min","4 hrs","4 hrs","","Altex","Finish","Alkyd",0,"","","","","","","false","manufactured","true","false","true","false","false","true","","","false","true","","",""],[121,"Duroprime HB","
Duraprime HB is a fast drying rust inhibiting primer for steel surfaces in non-immersion areas.
\r\n\r\nDuroprime is recommended for use on:
\r\n\r\n\r\n","Modified Alkyd","2 hours","30 days","Single Pack","",0,0,"N/A","#10","",43,1.100000023842,40,60,"","Red & Yellow Oxide, Grey, Black, White, Blue, D Gr","Low Gloss","","","","","","","","","","","false","true","true","false","false","","4 & 20, (Grey also 1's) litre cans","","> 90 C dry",38,"",70,"1hr","6 hrs","2 hrs","","40 min","4 hrs","1 hr","","30","2.5 hrs","40 min","30 days","20 min","2 hrs","30 min","","Altex","Primer","Alkyd",0,"","","","","","","false","manufactured","true","true","true","false","false","true","","","false","true","","",""],[297,"E Glass Scrim Cloth","","","","","","","","","N/A","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",250,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","","false","true","false","false","false","true","","","false","true","","",""],[124,"ECZ Cold Galvanizing","
ECZ Cold Galvanizing is zinc rich coating based on epoxy ester resins.
\r\nIt is excellent for use as a corrosion resistant primer for a variety of applications. It is most suitable as part of a single pack, two or three coat system.
\r\nThis product has been specially formulated for easy application.
Easy~Clean SX Additive is a proprietary modified inorganic additive used to improve the cleaning & washing characteristics in the Altex range of polyurethane finish coats.
\r\n\r\nIt also improves aqueous chemical resistance, and anti-mar properties.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","true","true","false","false","false","","500ml","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","500ml",""],[611,"Easy~Roll Defoaming Additive","Easy~Roll Defoamer is an additive specifically for use in Altex & carboline Polyurethane finish coats.
\r\n\r\nEasy~Roll is incorporated into the base component prior to catalysing. It enhances the rolling properties and assists in removing bubbling and foam.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","true","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[505,"Enamel Quick Dry Additive","This additive accelerates the cure of Isotal Enamel.
\r\n\r\nIt will increase the speed of cure, increase hardness and improve the overall finish over that of a single pack product,
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","500ml","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","500ml",""],[696,"Encapsulation Sealer-15","Encapsulation Sealer-15, a low VOC epoxy primer/sealer specifically designed to seal porous/ fibrous substrates. Not only is it user-friendly, but it also accepts a variety of commercial and decorative topcoats, allowing for versatile finishing options. This product offers enhanced durability with less requirements for surface preparation on encapsulating projects. Meeting ASTM 1494-12 standards, classifying it as a bridging encapsulant. Reliable performance to protect and preserve various surfaces effectively. Encapsulating fibre containing surfaces is a crucial step in the safe removal process by sealing off coated surfaces to mitigate the release of harmful fibres into the air, significantly reducing risks during removal, allowing professionals to work more efficiently.
\r\n\r\nFEATURES:
\r\n\r\nEpoxy Accelerator is designed to reduce cure times in various epoxy coatings at lower temperatures. By the addition of recommended rates, cure times may be reduced by up to 50%.
\r\n\r\nCure may also be improved by ensuring the paints are stored in warmer, ambient conditions before mixing (15-25°C), and by ensuring a full induction time is utilised. (resting the mixed paint for 15-30 minutes before use).
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","true","true","false","false","false","","500ml","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","true","true","true","false","true","true","false","","true","true","","500ml",""],[439,"Epoxy Tie Coat","","","","","","","","","XX","Data","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[599,"Euclid Duralkote 700","Anti-Carbonation Coating for Concrete
\r\n","","24 hrs","","","","","","N/A","#10","",58,"","","","","","","","","","","","","","","","","","","false","false","false","","20kg","","","","",125,"","","","","","","","","","","8 hrs","","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","Grey","true","true","","",""],[681,"Euclid E3-Deep Pour","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[682,"Euclid EUCO QWIKjoint UVR","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[676,"Euclid EUCO QWIKstitch","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[677,"Euclid EUCO TREMgrout NS","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[680,"Euclid Eucocrete HBM","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[678,"Euclid Express Repair","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[679,"Euclid VersaSpeed LS100","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","false","","true","true","","",""],[264,"Extended Recoat Epoxy","","","","","","","","","1:1","1/2","",70,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","1 hr","90dys","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[131,"E~Line 239","E~Line® 239 is a high performance, acrylic polyurethane which will provide excellent gloss and colour retention as well as resistance to moderate/severe corrosive environments for structures equipment and fixtures.
\r\n\r\nE~Line® 239 is recommended for use on:
\r\n\r\nE~Line® 239-Recommended for steel, aluminium, masonry, timber or fibreglass when correctly prepared and primed
\r\n","Acrylic Urethane","N/a","N/a","Two Pack","",4,1,"4:1","#25","#5",56,1.379999995232,50,75,"","AS 2700, BS 381C, BS 5252","High Gloss","",8,"","","","","","","","","true","true","true","false","true","","1, 5, 20 litre kits","Normal, 12 months","121 C Dry",0,30,50,"0","48","12","","0","12","6","","0","8","4 hours","Data","0","6","3","","Altex","Finish","Urethane",0,"","February, 08 2000 00:00:00 +1300","A Webb","","","","true","manufactured","true","true","true","false","false","true","","","false","true","","",""],[132,"E~Line 350","Aliphatic Urethane Gloss Finish","Aliphatic Acrylic Urethane","","","Two Pack","",4,1,"4:1","K-200","#5",50,1.129999995232,50,75,"","AS 2700, BS 381 C, BS 5252","High Gloss","",10,"","","","","","","","","true","true","false","false","false","","1, 5 and 20 litre kits","","120 C dry",27,30,50,"","","","","30 min","4 hrs","40 min","","20 min","2.5 hrs","30 min","","15 min","2 hrs","20 min","","Altex","Finish","Urethane",0,"","","","","","","false","","false","true","false","false","false","true","","","false","true","","",""],[248,"E~Line 359HS","","","","","","","","","4:1","No.5","",70,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","4hr","3dy","","","","","","","","","","","","false","","","false","","true","true","false","false","false","true","","","false","true","","",""],[224,"E~Line 379","High gloss, high performance, two component, chemically cured polyaspartic urethane designed for use in areas where maximum gloss and colour retention are required.
\r\n\r\nFEATURES:
\r\n\r\nFast cure, high gloss, aliphatic polyurethane which is ideal for use where a polyurethane finish is specified and where rapid drying is desirable. It will provide good gloss and colour retention as well as resistance to moderate to severe corrosive environments for:
\r\nFEATURES:
\r\n\r\nGraded silica blend for epoxy putty / mortar mixes
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","true","false","false","","true","true","","",""],[139,"Firetex FX2000","Firetex FX2002 is a specialist third generation thoroughly tested and certified thin film intumescent coating for the protection of steel against structural failure against fire for periods up to 2 hours (120 FRR).
\r\n\r\nFiretex FX2002 is fast drying and designed for shop or site application by airless spray, achieving 2 hour protection to qualifying structural steel in 1 to 4 coats.
\r\n","Intumescent","16 hours","30 days","Single Pack","","","","N/A","#10","X100",75,1.360000014305,100,5000,215,"Off White","Flat","","","","","Approved by Standards NZ, Certifire etc. to BS 476: Part 21 1987 for the protection of loaded structural steel for up to 1? hours FRR","","","","","","true","true","false","false","false","","20 litre pails (4's repack)","","",2,"",100,"","","","","","","","","25 min","Data","4 hours","3 months","","","","","Firetex","Fireproofing","Fireproofing","","","","","","","","false","imported","true","true","false","false","false","false","","","false","true","","",""],[410,"Firetex FX2002","","","","","","","","","NA","#10","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","","true","true","true","false","false","true","","","false","true","","",""],[478,"Firetex FX2003","Thin Film Intumescent
\r\n","","16 hours","","","","","","N/A","#10","",75,"","","","","","","","","","","","","","","","","true","false","false","true","false","","","","","","",0,"","","","","","","","","","","16 hours","1 month","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","","true","true","","",""],[479,"Firetex FX2003","Made to Order or imported lines subject to availability.
\r\n\r\nThis solvent borne intumescent is applied to steel for fire ratings up to 120 minutes, and is designed to be used in interior systems. (typically overcoated with Pro~Seal Intumescent Seal Coat and polyurethane finish coats as appropriate)
\r\n\r\n\r\n\r\n
Solvent Based Intumescent Base Coat
\r\n","Intumescent","","","Single Pack","","","","N/A","#10","X100",75,1.320000052452,100,5000,258," White","Flat","","","","","Approved by Standards NZ, Certifire etc. to BS 476: Part 21 1987 for the protection of loaded structural steel for up to 1? hours FRR","","","","","","true","true","false","false","false","","20 litre pails (4's repack)","","",2,"",100,"","","","","","","","","25 min","Data","4 hours","3 months","","","","","Firetex","Fireproofing","Fireproofing","","","","","","","","false","imported","true","true","false","false","false","false","false","","false","true","","",""],[405,"Firetex Intumescent","","","","","","","","","N/A","Data","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[141,"Firetex M70","Thin Film Intumescent Base Coat","Intumescent","","","Single Pack","","","","N/A","X-100","X100",70,1.299999952316,100,5000,"","Off White","Flat","","","","","Approved by Standards NZ, Certifire etc. to BS 476: Part 21 1987 for the protection of loaded structural steel for up to 2 hours FRR","Intumescent coating for fire protection on steel","","","March, 13 1995 00:00:00 +1300","","true","true","false","false","false","","20 litre pails (4's repack)","","",27,"",100,"","","","","","","","","Data","Data","12 hrs","3 mths","","","","","Firetex","Fireproofing","Fireproofing","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[142,"Firetex M71","Flame Retardent Sealer for Intumescent","Modified Vinyl Acrylic","","","Single Pack","","","","N/A","X-100","X100",45,1.47000002861,50,100,"","White and full tint range","Sheen","","","","","Approved sealer for Firetex M70/M71-* Systems for fire protection of structural steel up to 2 hours FRR","Flame retardant decorative sealer for Firetex M70\r\nHAs been replaced with recanned CB900","","","March, 13 1995 00:00:00 +1300","April, 06 1998 00:00:00 +1200","true","true","false","false","false","","4 and 10 litre cans","","70 C dry",24,"",75,"","","","","","","","","2 hrs","4 hrs","8 hrs","N/A","","","","","Firetex","Fireproofing","Vinyl / Acrylic","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[143,"Firetex M71E","Gloss Sealer for Firetex M70","Fireproofing Sealer","","","Single Pack","","","","","T48","S53",50,1.210000038147,40,60,"","Black, White and tint range","High Gloss","","","","","","Alkyd gloss sealer coat for Firetex M70","","","March, 13 1995 00:00:00 +1300","","true","true","false","false","false","","1, 4 and 10 litre cans","","> 100 C",38,"",50,"","","","","","","","","4 hrs","12 hrs","12 hrs","2 wks","","","","","Firetex","Fireproofing","Alkyd","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[144,"Firetex M77","Thin Film Intumescent Base Coat","Intumescent","","","Single Pack","","","","N/A","X-100","X100",70,1.299999952316,100,5000,"","Off White","Flat","","","","","Approved by Standards NZ, Certifire etc. to BS 476: Part 21 1987 for the protection of loaded structural steel for up to 2 hours FRR","","","","","","true","true","false","false","false","","20 litre pails (4's repack)","","",27,"",100,"","","","","","","","","Data","Data","12 hrs","3 mths","","","","","Firetex","Fireproofing","Fireproofing","","September, 11 2001 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[145,"Firetex M90","Epoxy Passive Fire Protection","Epoxy Intumescent","","","Two Pack","",2,1,"2:1","LCT 9","",100,1.05999994278,1000,7000,0,"Light Blue","Sheen","",0,"","","","","","","","","true","true","false","false","false","","60 kg / litre","","",0,0,1000,"","","","","","","","","3 hr","14 hr","3 hr","7 dy","","","","","Firetex","Fireproofing","Epoxy",0,"August, 18 2003 00:00:00 +1200","","A Webb","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[316,"Firetex M93","","","","","","","","","2:1","Data","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[476,"Fire~Lock Sealer","A waterborne sealer / barrier coating for thin film intumescent coatings. Designed to seal off the surface of intumescent coatings either to reduce the risk of short term weather exposure, or to prime the surface prior to the application of solvent borne two component polyurethane finish coats.
\r\n\r\nFast dry, low VOC's, easy to use.
\r\n","","24 hours","Data","","","","","N/A","Water","",44,"","","","","","","","","","","","","","","","","true","false","false","false","false","","","","","","",45,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","false","false","false","true","","","false","true","","",""],[496,"Flattening Paste","Flattening Paste is used for gloss reduction in coatings utilised in Industrial Facilities, for Architectural finishes, on Ocean going vessels and on Pleasure Craft.
\r\nFlattening Paste can be used:
Deckcoat EP is a high performance, solvent free, epoxy resin coating system designed to create a uniform “Orange Peel” surface texture.
\r\n\r\n
\r\nUses
\r\nTypically used as a hard wearing, protective, coloured floor coating. Can be used as a stand-alone coating or as part of Flowcrete’s resin flooring systems.
A high moisture tolerant (up to 95% RH as per ASTM F2170, AS1884:2012) 100% solids epoxy primer for cementitious substrates.
\r\n\r\n
\r\nUses
\r\nDeckshield ED Primer permits the use of Flowcrete products to be applied on top of concrete substrates that have a relative humidity of up to 95% and MPa of >725.
\r\nHowever, the surface must be dry; no moisture may be visible on the surface.
A two component coloured, flexible polyurethane coating.
\r\n","","8 Hours","24 Hours","","","","","4:1kg","Data","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","10kg,20kg,","","","","",0,"","","","","","","","","","","N/a","N/a","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","","false","true","","",""],[689,"Flowcrete Deckshield PDS Membrane","Deckshield PDS Membrane is a medium viscosity polyurethane modified reactive methyl methacrylate (PUMMA) resin.
\r\n\r\n
\r\nUses
\r\nTypically used as a crack bridging waterproof membrane within the Deckshield ED Rapide system. This highly elastomeric membrane remains flexible and crack bridging to -20°C.
Deckshield UV (white) is a 2 component, high gloss, UV stable, abrasion resistant aliphatic, coloured polyurethane sealer.
\r\n\r\n
\r\nUses
\r\nTypically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.
Deckshield UV (WB) is a high solids, 2-component, water based, aliphatic, coloured, UV light stable, polyurethane coating.
\r\n\r\n
\r\nUses
\r\nUsed as a final coloured seal coat for the Deckshield range as well as other Flowcrete systems. This will provide a colour stable, low odor, abrasion resistant and UV light stable finish.
Deckshield UV (WB) is a high solids, 2-component, water based, aliphatic, clear, UV light stable, polyurethane coating.
\r\n\r\nUses
\r\nUsed as a clear coat over Flowcrete’s decorative Terrosso flooring systems and for sealing of cementitious substates. This will provide a colour stable, low VOC, abrasion resistant gloss finish.
Deckshield UV (clear) is a 2 component, high gloss, UV stable, abrasion resistant aliphatic polyurethane sealer available in clear or coloured.
\r\n\r\n
\r\nUses
\r\nTypically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.
Flowcoat CR is a durable, coloured, solvent free epoxy resin-based flooring solution which provides excellent chemical resistance.
\r\n\r\nUses
\r\nTypically used in industrial environments which may be subjected to chemical spillages. Can be used as a stand-alone coating or as part of Flowcrete’s resin flooring systems.
Flowcoat OP is a hardwearing and solvent free, epoxy resin flooring solution used to service various manufacturing workspaces by delivering the level best in protective and chemical resistant floor coatings.
\r\n\r\nThe low maintenance, seamless and hygienic finish is aesthetically attractive. Designed to create a uniform "Orange Peel" surface texture, Flowcoat OP may be used as a hard wearing protective floor coating.
\r\n\r\nProduct Benefits
\r\n\r\n\r\n","","8 hours","24 hours","","","","","Data","Data","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","10Kg","","","","",0,"","","","","","","","","","","8 hours","24 hours","","","","","","","","","","","","","","","false","imported","true","true","false","false","true","true","false","","true","true","0.20","",""],[697,"Flowcrete Flowcoat SK","
Flowcoat SK is a two pack, low VOC, high build epoxy resin based coating with excellent resistance to hydraulic fluids and Skydrol®
\r\n\r\nUses:
\r\nTypically used as a durable coloured floor coating in internal aviation environments.
\r\nCan be used as a stand-alone coating or as part of Flowcrete’s resin flooring systems.
Flowfast Primer is a low viscosity, colourless, 2 component reactive methyl methacrylate (MMA) resin with good moisture tolerance.
\r\n\r\n\r\n\r\n
Uses
\r\nTypically used as a primer to give excellent bonding to metal (e.g. iron, aluminium, stainless steel), ceramic tile and concrete substrates.
Flowfast Binder is a medium viscosity, colourless, 2 component reactive methyl methacrylate (MMA) resin.
\r\n\r\n
\r\nUses
\r\nTypically used as a Binder within the Flowfast flooring range. Systems using Flowfast Binder as the main binder must always be treated with a Flowfast Sealer (e.g. Flowfast Sealer or Flowfast Flexible Sealer). Flowfast Binder is a general purpose resin; it must not be used in areas subject to heavy hot water loading.
Flowfast 215 Flexible Binder is a 2 component reactive flexible methyl methacrylate (MMA) modified resin.
\r\n\r\n
\r\nFlowfast 215 Flexible Binder is typically used in the following applications.
• To provide a wearing and protect coats to Flowcrete MMA Waterproof membranes.
\r\n• Flexible floor coverings especially if exposed to low temperatures e.g. coolers and freezers.
\r\n• As a wearing layer for outdoor applications exposed to heavy mechanical loadings and rapid temperature variations i.e. ramps, bridges and carparks.
\r\n• As an intermediate coat for floors exposed to hot water.
Flowfast 319 Flexible Sealer is a medium viscosity, UV-resistant, 2 component reactive methyl methacrylate resin (MMA).
\r\n\r\n
\r\nUses
\r\nFlowfast 319 Flexible Sealer is used as part of the Deckshield Rapide and Flowfast range. In the liquid state it is blue-violet in colour. After polymerisation the sealer dries clear. Flowfast Flexible Sealer resists occasional hot water spillage up to 80°C. The flexibility and high UV resistance are also ideal for outdoor applications.
Flowfast Quartz Scatter is a hard wearing, decorative, fast curing, methyl methacrylate (MMA) resin floor topping made up of colour stable quartz granules encapsulated in a clear resin binder.
\r\n\r\nFlowfast Quartz Scatter has been developed to enable very fast track applications, therefore dramatically reducing down time.
\r\n\r\nProduct Benefits
\r\n\r\nFlowfresh Coating is a 4-component, solvent free, antimicrobial coloured polyurethane cement coating with a matte finish.
\r\n\r\n
\r\nUses
\r\nCan be used as a seal coat for Flowfresh flooring systems including coving. This will provide a hard-wearing, chemical resistant, antimicrobial coloured sealer. Additionally Flowfresh Coating can be used as an alternative to Flowfresh Primer.
Flowfresh Coating Satin is a 4-component, anti-microbial, solvent free, coloured polyurethane cement coating with a satin finish.
\r\n\r\n
\r\nUses
\r\nCan be used as a seal coat for Flowfresh flooring systems including coving. This will provide a hard-wearing, chemical resistant, antimicrobial coloured sealer in a semi-gloss/satin finish.
\r\nEnvironment
Flowfresh Pigment is a 1-component coloured resin paste.
\r\n\r\n
\r\nUses
\r\nUsed as pigment to colour the Flowfresh range of products.
Flowfresh SL is a self-levelling antimicrobial flooring solution with impressive chemical and heat resistant properties designed to service the hygiene industries.
\r\n\r\nThe antimicrobial polyurethane resin floor finish is easy to clean and sterilise making it ideal for use in dry or semi-wet processing zones such as food or pharmaceutical packaging.
\r\n\r\nProduct Benefits:
\r\n\r\nFlowfresh Sealer is a 100% solids, gloss, antimicrobial, solvent-free polyurethane coloured coating for the Flowfresh SR system.
\r\n\r\n
\r\nUses
\r\nCan be used as a seal coat for Flowfresh SR system or as a stand-alone product. This will provide a hard-wearing, slip resistant, chemical resistant, antimicrobial coloured gloss finish.
Flowprime AU is a 2-component low viscosity epoxy resin primer for cementitious substrates.
\r\n\r\nUses
\r\nTypically used for priming of concrete and screeds, prior to overcoating with Flowcrete resin toppings.
Flowprime ESD Conductive is a 3 component low viscosity resin based conductive primer.
\r\n\r\n
\r\nUses
\r\nTo be used prior to overcoating with Flowcrete’s range of electrostatic dissipative (ESD) flooring systems. Providing electrical continuity under the ESD resin floor toppings and to earthing points.
Clear gloss sealer for flowcrete
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[551,"Flowcrete Flowseal UV Satin ","Flowseal UV Satin is a 2-component, UV stable, abrasion resistant aliphatic polyurethane sealer in a Satin/Semi gloss finish.
\r\n\r\nUses
\r\nTypically used as a high wear resistant UV stable sealer to further enhance the performance of Flowcrete’s flooring systems.
Flowseal UV Satin (clear) is a 2 component, UV stable, abrasion resistant aliphatic polyurethane sealer in a Satin/Semi gloss finish.
\r\n\r\n
\r\nUses
\r\nTypically used as a final seal coat for Flowcrete decorative systems. This will provide a high abrasion and UV light stable satin finish. Can also be used as a seal coat applied directly onto honed and polished concrete.
add data
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","false","false","true","true","false","","false","true","","",""],[541,"Flowcrete Flowshield ESD Filler D","add data
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","false","false","true","true","false","","false","true","","",""],[700,"Flowcrete Flowshield ESD SL","","","8 hours","24 hours","","","","","Data","Data","",0,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",0,"","","","","","","","","","","8 hours","24 hours","","","","","","","","","","","","","","","false","imported","false","false","false","false","true","true","false","","true","true","3.6","",""],[701,"Flowcrete Flowshield SL","","","8 hours","24 hours","","","","","Data ","Data","",0,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",0,"","","","","","","","","","","8 hours","24 hours","","","","","","","","","","","","","","","false","imported","false","false","false","false","true","true","false","","true","true","3.6","",""],[692,"Flowcrete Flowtex F1 Coving Mortar","A three component pack, solvent free, epoxy resin based coving mortar.
\r\n\r\nUses
\r\nUsed to form coved skirtings. Can be feathered down to a minimum thickness of 1 mm.
Coloured Terrosso flake
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","true","true","","",""],[554,"Flowcrete Universal Hardener 2107","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","false","false","false","false","false","","false","true","","",""],[624,"Flowcrete Universal Resin","Flowcrete Universal Resin is a high performance, low viscosity, solvent free epoxy resin based on advance resin technology.
\r\n","","8 hours","24 hours","","","","","Data","Data","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","8 hours","24 hours","","","","","","","","","","","","","","","false","","true","true","false","false","true","true","false","","true","true","","",""],[722,"Flowfast DINP Pigment Paste","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","","","true","true","","",""],[548,"Flowfresh Std Sealer 2102","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","false","false","false","false","false","","false","true","","",""],[563,"G60 Gunwash","General purpose gun-wash and equipment cleaning solvent
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","20L, 200L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","20L, 200L",""],[328,"Galoseal WB","","","","","","","","","N/A","N/A","",31,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",25,"","","","","","","","","","","1 hr","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[593,"Galvanized Diamond Mesh","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","true","true","","",""],[148,"Gardcote - WB Epoxy Primer","Water-Borne Epoxy Primer","Water-Borne Epoxy Primer","","","Two Pack","",4,1,"4:1","Water","",47,1.370000004768,50,75,193,"Light Grey","Flat","",8,"","","","","","","","","true","true","false","false","false","","1 (and 5) US gallon kits","Do not freeze","120 C dry",93,30,75,"No","No","No","No","4 hrs","12 hrs","12 hrs","1 wk","3 hrs","6 hrs","12 hrs","1 wk","2 hrs","4 hrs","12 hrs","1 wk","Superseded","Primer","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[149,"Gardcote - WB Epoxy Semi-Gloss","Water-Borne Epoxy Semi-Gloss finish","Waterborne Epoxy finish","","","Two Pack","",1,1,"1:1","Water","",45,1.230000019073,50,125,200,"Tints available in Medium & Deep Bases","Semi-Gloss","",6,"","","","","","","","","true","true","false","false","false","","2 US gallon kits","Do not freeze","120 C dry",96,40,75,"No","No","No","No","4 hrs","12 hrs","24 hrs","1 wk","3 hrs","6 hrs","12 hrs","1 wk","2 hrs","4 hrs","12 hrs","1 wk","Superseded","Finish","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[499,"General Purpose Thickener","Inorganic, asbestos free powder for use in high strength water resistant gluing applications
\r\nThixotropic properties of General Purpose Thickener make it an excellent anti-sag agent in fairing and filleting mixes.
\r\nTranslucent properties do not affect the colour of glue line.
Reinforcing additive for a range of Carboguard epoxy coatings
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1.08kg (packed in a 2L tub - underfilled)","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1.08kg (packed in a 2L tub - underfilled)",""],[497,"Grafitti Cleaner","Altex Graffiti Cleaner is a ready to use, low odour, virtually non-flammable, and biodegradable cleaning solution formulated to remove most graffiti materials from both E~Line® 379 and Carbothane® 130 Clear coated masonry, concrete, steel, or other substrates.
\r\nSuitable for use to remove spray paint, markers, crayons and most types of other graffiti materials.
Hammerfinish is a high quality fast drying enamel based on alkyd resin, which produces an even hammer pattern.
\r\n\r\nHammerfinish is recommended for:
\r\n\r\n\r\n","Modified Enamel","N/a","N/a","Single Pack","",0,0,"N/A","#155","",40,"",25,40,"","Silver, Steel, Ag Blue, Blue, Green, Cu, Teal, Cha","Gloss Hammerfinish","","","","","","","","","","","true","true","true","false","false","","1, 4 and 20 litre cans","","110 C dry",24,"",30,"","","","","","","","","15 min","1.25 hr","1 hr","30 days","10 min","1 hr","1 hr","","Altex","Finish","Alkyd",0,"August, 31 1999 00:00:00 +1200","","A Webb","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[455,"Hi-Temp (CF) Mesh","","","","","","","","","","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[617,"Hi-Temp (carbon fibre) Mesh","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","true","true","","",""],[152,"High Build Rust Barrier","
Premium quality, single pack anti-corrosive primer designed to give superior protection to steel.
\r\nIt is recommended for use on:
FEATURES:
\r\n\r\nA high performance fast-dry solventborne line-marking paint, possessing excellent drying and good wear resistance properties.
\r\n\r\nMade to Order or imported lines subject to availability.
\r\nDesigned as a premium-grade, ultra-durable epoxy lining, Hydroplate 6500 is ideally suited for use on both concrete and steel surfaces in aggressive, hydrogen sulfide rich municipal and industrial wastewater environments. This reinforced, high-build epoxy offers swift return-to-service times and the convenience of single leg application. Hydroplate 6500 ensures exceptional longevity with its remarkably low permeability and outstanding chemical resistance, guaranteeing long-term durability and performance.
\r\n\r\nFEATURES:
\r\n\r\n2-component topcoat system for solid colours for use on yachts and pleasure crafts.
\r\nComposition based on a unique, patented acrylic polymer technology.
2K Finish coat in Solid, Metallic or Pearl finishes
\r\n","","Data","Data","","","","","4:1","TH91","",0,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",20,"","","","","","","","","","","10 mins","4 hours","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","true","","true","true","","",""],[602,"Imron DP4101/04 HS Primer","High solids sandable primer.
\r\n","","8 Hours","24 Hours","","","","","4:1","TH40","",47,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",80,"","","","","","","","","","","30 minutes","2 days","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","false","White","true","true","","",""],[601,"Imron DP6940 Super Flow HS Clearcoat","A 2 component, Clear finish coat
\r\n","","N/a","N/a","","","","","5:2","TH101","",48,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",70,"","","","","","","","","","","30 minutes","2 hours","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","Clear","true","true","","",""],[615,"Imron Elite","Imron Fleet Line Elite 3.5 VOC 2K PU Topcoat is a VOC compliant two-component topcoat from Imron Fleet Line. It has been designed to work with EL580 HS standard binder for high gloss on large flat surfaces. Imron Fleet Line Elite Topcoat is suitable for VOC-regulated markets, delivering excellent results and productivity.
\r\n","","1 hour","24 hours","","","","","3:1","Data","",50,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",50,"","","","","","","","","","","1 hour","24 hours","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","true","true","","",""],[413,"Intumastic 285","Made to Order or imported lines subject to availability.
\r\n\r\nSingle package, water-based, flexible mastic fire protective coating for cables and cable trays.
\r\n\r\nA water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall
\r\n","","","","","","","","N/A","Water","",53,"","","","","","","","","","","","","","","","","true","true","false","false","false","","18.9L","","","","",1580,"","","","","","","","","","","24hr","","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","false","true","","",""],[166,"Isotal Enamel","Isotal is a premium quality alkyd gloss enamel which is designed to protect and give good appearance to:
\r\nFEATURES:
\r\n\r\nA premium quality, single pack alkyd undercoat which is normally used under Isotal Enamel on properly primed surfaces. It can be used in areas such as:
\r\nFEATURES:
\r\n\r\nPremium ultra light weight filler for fairing, filling and filleting for use above and below the waterline.
\r\n\r\nUsually mixed with AY&B Epoxy Resin at a ratio typically around the 3 Parts Microballoons to 1 Part Epoxy Resin mix.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","true","true","false","false","false","","4L / 400g, 20L / 2kg, 120L / 12kg","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","imported","true","true","true","false","true","true","false","","true","true","","4L / 400g, 120L / 12kg",""],[177,"Mirrolac-WB - DTM Primer","DTM Waterborne Acrylic Primer and Flat Finish","DTM Acrylic Primer/Flat finish","","","Single Pack","",0,0,"N/A","Water","Water",44,1.409999966621,55,88,77,"White (and light tints)","Flat","","","","","","","","","","","true","true","false","false","false","","","","93?c","","",75,"0","0","0","0","1 hr","8 hrs","4 hrs","2 wks","40 min","5 hrs","2.5 hrs","2 wks","30","4 hrs","2 hrs","2 wks","Devoe Paint","Primer","Acrylic",13,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[176,"Mirrolac-WB - Gloss Enamel","Acrylic Waterborne Gloss Enamel","Acrylic Gloss Enamel","","","Single Pack","",0,0,"N/A","Water","Water",41,1.27999997139,37,50,190,"White plus tint range","Gloss","",0,"","","","","","","","","true","true","false","false","false","","","","93?c","",0,50,"0","0","0","0","3 hrs","10 hrs","4 hrs","1 wk","1.5 hrs","10 hrs","2.5","1 wk","1 hr","8 hrs","2 hrs","1 wk","Devoe Paint","Finish","Acrylic",14.1,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[178,"Mirrolac-WB - Semi Gloss Enamel","Waterborne Acrylic Semi-Gloss Enamel","Acrylic Semi-Gloss Enamel","","","Single Pack","",0,0,"N/A","Water","Water",42,1.25,37,50,190,"White plus tint range","Semi-Gloss","","","","","","","","","","","true","true","false","false","false","","","","93?c","","",50,"0","0","0","0","2 hrs","8 hrs","4 hrs","1 wk","1.5 hrs","5 hrs","2.5 hrs","1 wk","1 hr","4 hrs","2 hrs","1 wk","Devoe Paint","Finish","Acrylic",14.1,"","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[386,"Multi-Gard 955 CP","","","","","","","","","1:1","N/A","",99,"","","","","","","","","","","","","","","","","true","true","true","false","true","","","","","","",175,"","","","","","","","","","","18 hr","30 dy","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","true","true","","",""],[469,"Multi-Gard EtchAU","","","","","","","","","N/A","#155","",10,"","","","","","","","","","","","","","","","","false","true","true","false","false","","","","","","",20,"","","","","","","","","","","1 hour","3 months","","","","","","","","","","","","","","","false","","true","false","true","false","true","false","false","","false","true","","4L, 10L","White (while stocks last), Black (while stocks last), Grey (while stocks last)"],[471,"Multi-Gard GP 14AU","Availability: Australia only
\r\n\r\nHigh-gloss, fast dry, modified alkyd enamel topcoat with excellent application characteristics and overall appearance for shop use only.
\r\n\r\nFEATURES:
\r\n\r\nA corrosion resistant high performance, chemically cured epoxy primer, primarily for use on all steel, galvanised metal or aluminium surfaces
\r\n\r\nAvailability: Australia only
\r\n\r\nCorrosion and water resistant high performance, chemically cured, sandable epoxy coating, It can be used as a tie-coat over suitable prepared, aged epoxies and polyurethanes.
\r\nSuitable for Industrial and Marine situations.
FEATURES:
\r\n\r\nAvailability: Australia only
\r\n\r\nMulti-Gard GP 48 is fast-dry polyurethane coating which provides a high gloss finish which has excellent corrosion, abrasion and chemical resistance.
\r\nThe Multi-Gard GP (general purpose) products are formulated to protect steel substrates in a variety of service exposures typical of industrial OEM equipment destinations and commercial marine conditions. The Multi-Gard line tends toward rapid cure to handle and re-coat to facilitate through-put in shop painting applications.
FEATURES:
\r\n\r\nMulti-Gard® GP 5AU is a modified zinc phosphate alkyd primer.
\r\n\r\nContains new technology anti-corrosive inhibiting pigments (no lead or chromate pigments
\r\n","","2 hours","10 days","","","","","N/A","#10","",43,"","","","","","","","","","","","","","","","","false","true","true","false","false","","","","","","",70,"","","","","","","","","","","40 min","14 days","","","","","","","","","","","","","","","false","manufactured","true","false","true","false","true","true","false","","false","true","","4L, 10L","Red Oxide (while stocks last), Grey (while stocks last)"],[527,"Multi-Gard GP 88 DTMAU","","","N/A","N/A","","","","","4:1","#20","",56,"","","","","","","","","","","","","","","","","","","true","false","true","","","","","","",50,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","false","true","false","false","true","","","false","true","","",""],[475,"Multi-Gard HammerfinishAU","Single pack, fast drying enamel based on alkyd resin, which produces an even hammered pattern
\r\n\r\nFEATURES:
\r\n\r\nSingle component premium quality primer based on proprietary synthetic, immersion grade alkyd resins. An excellent protective primer for most substrates in marine and industrial exposures.
\r\nIt is recommended for use on:
FEATURES:
\r\n\r\nNullifire® S707-120 Waterborne Basecoats are thin film intumescent coatings for the fire protection of internal structural steelwork.
\r\n\r\nS707-120 is optimised for 90 and 120 FRR protection.
\r\n\r\nS707-60 Intumescent Basecoat is a white thin film intumescent coating for the fire protection of internal structural steelwork.
\r\n\r\nS707-60 provides effective structural fire protection, for steelwork, from 30 minutes up to a 90 minute fire rating.
\r\n\r\nBENEFITS
\r\n\r\nThree grades of Non Skid Particles are available to achieve the desired texture and finish. May be incorporated into a wide range of coatings, either as an intermediate coat, or as a finish coat. Either broadcast into a wet film, or mixed and roller applied. Fine grade may be spray applied. All products are sieved grades, meaning the finish is consistent and attractive, with no clumping of dust particles.
\r\n\r\nMedium and Coarse grades are highly abrasion resistant, with over 20 years of proven service.
\r\n\r\nUsed on both Pleasure Craft, commercial vessels, and various industrial facilities.
\r\n","Aggregate","","","Single Pack","",0,0,"N/A","","",100,2.599999904633,500,1000,0,"","","",0,"","","","","","","","","true","true","false","false","false","","1L / 520g (Fine only), 2L / 2kg (Medium & Coarse only)","","",0,0,500,"","","","","","","","","","","","","","","","","Altex / ICI","Auxillary","",0,"July, 20 2007 00:00:00 +1200","","A Webb","","","","true","imported","true","true","true","false","true","true","false","Fine, Medium, Coarse","true","true","","1L / 520g (Fine only), 2L / 2kg (Medium & Coarse only)","Fine, Medium, Coarse"],[573,"Nullifire S605","A solvent borne intumescent coating designed for fire ratings up to an hour.
\r\n\r\nNullifire provides a surface that is readily overcoated with a selection of architectural and protective finish coats.
\r\n","","","","","","","","N/A","N/A","",67,"","","","","","","","","","","","","","","","","","","false","true","true","","","","","","",750,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","","","false","true","","",""],[629,"Nullifire SC601","Made to Order or imported lines subject to availability.
\r\nA single pack acrylic thin film intumescent basecoat for the protection of internal and semi-exposed structural steel.
\r\n\r\nSC601 is optimised to provide 60 minutes fire resistance to ‘I’ section beams and columns, hollow columns and beams, as well as cellular beams, concrete filled hollows and solid steel rods. 90 minute and limited 120-minute protection is also available.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nKey Benefits Summary
\r\n• Water based intumescent coating suitable for internal use on structural steelwork for up to 120 minute fire resistance
\r\n• Easier to apply product for greater efficency on site with improved smooth matt finish
\r\n• Compatible with a full range of Nullifire primers and top seals
\r\n• Very low VOC
Made to Order or imported lines subject to availability.
\r\n\r\nA thin film intumescent coating for the fire protection of internal structural steelwork.
\r\nSC802 is optimised for up to 60 FRR fire resistance and designed for on-site application.
FEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\nCertified Applicators Only. Nullifire SC902 may only be applied by trained and approved applicators; refer to Altex Coatings for approved applicator listings in your area.
\r\n\r\nNullifire SC902 is a fast track on or off-site, low VOC, one coat high build system capable of providing up to 2 hours protection in a single coat.
\r\n\r\nFEATURES:
\r\nP40 Prepainting Cleaner is a non-ionic detergent, which is designed to clean intact, painted surfaces, as well as new surfaces in preparation for repainting.
\r\nOld painted surfaces are made “super-clean” with P40 Prepainting Cleaner, and the adhesion of subsequent coatings is promoted. No other preparation may be needed before repainting above water line surfaces, eliminating costly sanding, solvent wiping, abrasive sweep blasting or roughening-up of the old painted surfaces.
FEATURES:
\r\nMade to Order or imported lines subject to availability.
\r\nFireproof and ecological mortar for the passive fire protection of steel, concrete, composite concrete-steel sheet slab structural elements, fire compartmentation and fire stop partitions. Fire resistance of up to 4 hours depending on the construction system.
\r\n\r\nFEATURES
\r\n\r\nHydrocoat is an advanced technology, water-based, ablative antifouling which offers exceptional multi-season protection against most types of fouling.
\r\n\r\nHydrocoat’s innovative technology replaces the harsh solvents found in most bottom paints with water, resulting in an easier application and clean up, with no heavy solvent smell.
\r\n\r\nHydrocoat’s ablative surface wears away with use, exposing fresh biocides while eliminating paint build up and the need for sanding. The low-odour formula is so environmentally friendly, it exceeds even the most stringent air pollution regulations.
\r\n\r\nHydrocoat withstands frequent trailering, beaching, and launching. Its unique formula allows unlimited dry time to launch, so you can paint in the autumn or winter.
\r\nFEATURES:
\r\nVivid offers high-performance, multi-season antifouling protection for all substrates, including aluminium hulls and outdrives when used with a suitable priming system. Its hybrid technology combines the benefits of ablative and hard paints, providing a hard, smooth surface that withstands trailering and can be burnished to a high-performance racing finish. Vivid is compatible with cuprous oxide and alloy-safe antifoulings.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nGlass flake-filled coating with dense cross-linking that exhibits excellent overall chemical resistance to a variety of aggressive chemicals. Glass reinforcement provides added abrasion resistance, permeation resistance and internal reinforcement. 1205 exhibits very good acid resistance.\r\nExcellent for use as a lining for tanks or pipes in process facilities where hot water or abrasive conditions exist.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nPhenoline 311 is a holding primer designed for application in storage / tanks prior to application of the selected tank coating.
\r\n\r\nFeaturing Low Temperature Cure, Potable Water approval (AS4020 / ANSI/NSF ) and extended recoat times this Novalac / Phenalkamine primer provides exceptional corrosion resistance and adhesion properties.
\r\n","","","","","","","","3:1","#2","",47,"","","","","","","","","","","","","","","","","true","true","false","false","false","","8L","","","","",40,"","","","","","","","","","","30 minutes","30 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","Red (MTO)","false","true","","",""],[281,"Phenoline 341","Phenoline 341 is a solventless, epoxy lining for a variety of cargoes including water, potable water, wastewater, seawater, fuels, crude oils, and other solutions.
\r\n\r\n\r\n","","","","","","","","4:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","3.78L, 18.9L","","","","",500,"","","","","","","","","","","18 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","Grey (MTO)","true","true","","",""],[263,"Phenoline 353","","","","","","","","","4:1","#2","",75,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","8 hours","3 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","true","","","false","true","","",""],[385,"Phenoline 353 LT","
Made to Order or imported lines subject to availability.
\r\n\r\nPhenoline 353 LT is a highly cross-linked epoxy lining with extraordinary overall chemical resistance and versatility. It has a unique blend of resins that make it highly resistant to a variety of aggressive cargoes like gasoline, gasoline blends, biodiesel, fuel oils, and others. It can be used in both acidic and high temperature caustic exposures. Markets served are terminals, refineries, petrochemical, wastewater, railcar linings, subsea oil and gas equipment, and many others. This low temperature cure formulation allows application and curing down to 2°C.
\r\n\r\nFEATURES:
\r\nMade to Order or imported lines subject to availability.
\r\n\r\nThis product is a solvent-free, high performance epoxy coating designed as an internal tank, valve and pipe lining for chemical or other commodity storage. It is a unique blend of resins and curing agents that allow batch mixing for ease of application. Plural component spray equipment is not required. The product is blush resistant and is typically applied at film thicknesses of 500 microns or thicker as needed (tank floors). It can handle exposures typically seen in the oil and gas industries; crude oils and fuels. It is resistant to NGL condensates, produced water, brines, industrial process water, waste water, and sewage. Ideal for municipal wastewater and water treatment facilities.
\r\n\r\nFEATURES:
\r\nContact Carboline Technical Service for approved dimensions.
\r\n*Valid when manufactured at a certified location.
Made to Order or imported lines subject to availability.
\r\nThis product is a solvent-free, high performance epoxy coating specifically designed as a pit filling primer with ideal flow properties allowing it to wet-out and fill moderate to severe pitting on steel tank bottoms. It's unique formula allows batch mixing for ease of application. With an appropriate lining, it can withstand exposures typically seen in the oil and gas industries. It is resistant to crude oil, NGL condensates, produced water, brines, and industrial process water.
\r\n\r\nFEATURES:
\r\nA bake coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. Tank lining for solvent, concentrated sulfuric acid, hot water, food products and as a protective coating for machinery parts, filter press plates, fans, etc. PLASITE 3070 L meets the FDA requirements for 21 CFR, 175.300.
\r\n","","Data","Data","","","","","N/A","#68","",42,"","","","","","","","","","","","","","","","","","","false","false","false","","1 gal","","","","",75,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","imported","true","true","false","false","false","false","false","Med Tan","true","true","","",""],[706,"Plasite 4100","Made-To-Order - Plasite 4100 is a high performance lining-grade coating reinforced with inert flake pigments combined with a special curing system to provide outstanding chemical resistance and physical properties. It has exceptional resistance to inorganic and organic acids, oxidizing agents and salts. It can handle dry heat up to 193 °C (380 °F) and will resist condensing acid vapors (sulfuric) typically found in FGD (flue gas desulfurization) systems.
\r\n","","N/A","N/A","","","","","Data","#76","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",500,"","","","","","","","","","","5 hours","Data","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","true","true","","",""],[388,"Plasite 4110","","","","","","","","","","#20","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","10 hours","30 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","true","true","","",""],[397,"Plasite 4300","","","","","","","","","1:1*","#20","",57,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","3 hours","24 hours","","","","","","","","","","","","","","","false","","true","true","false","false","false","false","","","true","true","","",""],[340,"Plasite 4301 HT","","","","","","","","","Kit","SM*","",91,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",500,"","","","","","","","","","","5 hours","7 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[716,"Plasite 4301 HT","","","","24 hours","","","","","4:1","N/A","",100,"","","","","","","","","","","","","","","","","","","true","true","true","","","","","","",500,"","","","","","","","","","","","24 hours","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","false","Light Grey, White","true","true","","","Light Grey, White"],[558,"Plasite 4310","","","","","","","","","1:1*","Data","",57,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",900,"","","","","","","","","","","3 hours","24 hours","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","","","true","true","","",""],[351,"Plasite 4500","","","","","","","","","4:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",750,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[641,"Plasite 4550","PLASITE 4550 is a 100% solids, reinforced, premium novolac epoxy coating for internal tank lining. It is resistant to a broad range of chemicals such as fuels, salts, alkalis, strong inorganic acids, some solvents, sour crude oil and 98% sulfuric acid.
\r\n","","","","","","","","4:1","","",100,"","","","","","","","","","","","","","","","","","","true","false","false","","5 Gallon kit","","","","",500,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","false","false","false","false","false","false","Light Gray, White","true","true","","",""],[303,"Plasite 4550 S","","","","","","","","","4:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",500,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","true","true","","",""],[300,"Plasite 4555 S","","","","","","","","","4:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",700,"","","","","","","","","","","12","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[387,"Plasite 5302","","","","","","","","","1:1:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",3000,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[557,"Plasite 5309","","","","","","","","","1:1:1","N/A","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",3000,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","","","true","true","","",""],[404,"Plasite 5325 (liner)","","","","","","","","","Data","#71","",91,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",3000,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[400,"Plasite 7122","","","","","","","","","16:1","#71","",67,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",175,"","","","","","","","","","","12hrs","5 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[597,"Plasite 7133HS","A bake coating using a phenolic resin (baked, unmodified) with superior resistance to sulfuric acid and solvents. Conforms to most VOC regulations. Tank lining for solvent, concentrated sulfuric acid, hot water, food products and as a protective coating for machinery parts, filter press plates, fans, etc. PLASITE 3070 L meets the FDA requirements for 21 CFR, 175.300.
\r\n","","Data","Data","","","","","7:1","#201","",61,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",225,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","","White, Light Grey, Light Blue","true","true","","",""],[373,"Plasite 7156","","","","","","","","","8:2:1","#71","",74,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","24hr","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[363,"Plasite 7159","","","","","","","","","4:1","71","",68,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","Data","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[283,"Plasite 9060","","","","","","","","","4:1","#71","",89,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","12 hours","14 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[580,"Plasite 9060","A high solids modified epoxy cured with an amine adduct curing agent. Designed specifically as a highly chemical-resistant, non-toxic, tank lining.
\r\n\r\nFeatures
\r\n\r\n• Excellent overall chemical resistance to a wide range of acids, alkalies and solvents
\r\n\r\n• Very good abrasion resistance and flexibility
\r\n\r\n• Complies with FDA 21 CFR 175,300 criteria for food contact
\r\n","","12 hours","7 days","","","","","4:1","#225E","",80,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",175,"","","","","","","","","","","12 hours","7 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","","true","true","","",""],[414,"Plasite 9060","","","","","","","","","4:1","","",89,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","12 hours","","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[282,"Plasite 9060 HAR","","","","","","","","","4:1","#71","",80,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","Altex","Altex","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[392,"Plasite 9081 SC","","","","","","","","","5:1","P#71","",92,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","12 hours","7 days","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[391,"Plasite 9085","","","","","","","","","4:1","#71","",77,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","12 hours","5 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[419,"Plasite 9133M","","","","","","","","","2:1","#71","",67,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",150,"","","","","","","","","","","12 hours","5 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[637,"Plasite 9570","Plasite 9570 is a highly resistant film for chemical tank lining service. Specifically formulated for
\r\nexcellent abrasion resistance while retaining temperature, chemical and other physical properties to
\r\nprovide greater release properties to aid in the prevention of product hang-up or bridging problems.
Altex Polyurethane Accelerator is designed to reduce the time to Hard Cure in winter temperatures in a range of Altex Polyurethane finish coats:
\r\nUse in:
A fast drying, economical, steel primer designed for use in engineering fabrication shops. Pre~Fab is suitable as a stand-alone coating in mild interior environments and provides good protection to structural steel in moderate exterior environments when topcoated with compatible alkyd or acrylic coatings. Pre~Fab is the primer of choice for SSPC-SP 2 hand tool cleaned structural steel to be enclosed within wall framing.
\r\nFEATURES:
\r\nA single pack sealer designed for use as part of an approved Altex Coatings Ltd single pack, solvent borne intumescent coating system. It is applied to cured approved intumescent coatings to protect it from moisture ingress, so that steel may be stored outside with enhanced weathering properties.
\r\nIt can minimise solvents in the subsequent finish coats from re-entering the approved intumescent film.
\r\nWhen correctly applied to partially cured approved intumescent, Pro~Seal allows residual solvents, retained within the approved intumescent to transpire through the film. Full cure (hardness at Shore D-50) may then be achieved for the intumescent film.
Pro~Seal is the first intumescent seal coat that significantly reduces those risks that can be encountered with approved single pack, solvent borne intumescent coatings:
\r\n
FEATURES:
\r\nTwo component, 100% solids intumescent coating.
\r\nFeaturing full jet fire certification in accordance with ISO 22899
\r\nExcellent hydrocarbon pool fire protection (ISO 834/BS-476)
\r\nLR, DNV & ABS certification
Medium density cementicious fire proofing product.
\r\n","","","","","","","","N/A","Water","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",25000,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","true","","","false","true","","",""],[341,"Pyrocrete 241","Made to Order or imported lines subject to availability.
\r\n\r\nA 55 lb./ft³ (881 kg/m³) density, Portland cement based, cementitious fireproofing. It provides bothhydro carbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries,\r\npetrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nA 640 kg/m³ (40 lb./ft³) density, Portland cement based, cementitious fireproofing. It provides both hydrocarbon and cellulosic fire protection for structural steel and can also be used to upgrade the fire resistance of existing concrete. Recommended areas of application include refineries, petrochemical, pharmaceutical facilities, pulp and paper mills, offshore platforms, nuclear and conventional power plants, factories, warehouses, institutional and biomedical facilities.
\r\n\r\nFEATURES:
\r\n\r\nWater based elastomer tie coat for use over the top of PUR foams
\r\n","","8 hours","24 hours","","","","","N/A","Water","",60,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","true","","","false","true","","",""],[195,"RIPO","RIPO (Rust Inhibiting Penetrating Oil) is a drying “wetting oil” pre-treatment, for use on hand or\r\npower tool cleaned surfaces and sometimes with brush blasted surfaces, prior to application of High\r\nBuild Rust Barrier and other alkyd coatings.\r\nRIPO forms a water-resistant film and is useful in protecting steel from condensation corrosion as\r\nencountered on:
\r\nFEATURES:
\r\nReactamine 760 is a solvent free aromatic hybrid polyurethane elastomeric membrane.
\r\n\r\nEnvironmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for potable water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service
\r\n\r\nCombines polyurethane and polyurea technologies to form a hybrid polyurethane
\r\n","","","","","","","","2:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","56.7L","","","","",1500,"","","","","","","","","","","1 hour","18 hours","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","false","false","","true","true","","",""],[587,"Reactamine 760 HB","Made to Order or imported lines subject to availability.
\r\n\r\nEnvironmentally friendly, advanced hybrid technology, plural-component applied coating used as a lining for water, wastewater, manholes, penstocks, dam gates, pipelines and other aggressive immersion applications. Provides protection against microbiologically induced corrosion (MIC) and hydrogen sulfide corrosion found in wastewater treatment service. Ultra high build product designed to be applied at high thickness in one coat application.
FEATURES:
*Valid if manufactured at a certified location.
\r\n","","N/A","N/A","","","","","2:1","N/A","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","56.7L / 15 Gallon kit","","","","",800,"","","","","","","","","","","1 hour","12 hours","","","","","","","","","","","","","","","false","imported","true","true","false","false","true","true","false","","true","true","","56.7L / 15 Gallon kit",""],[339,"Reactamine ET","","","","","","","","","1:1pl","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",2000,"","","","","","","","","","","N/A","N/A","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[396,"Reactamine Joint Seal","Made to Order or imported lines subject to availability.
\r\n\r\nReactamine Joint Seal FC is a 2-component 100% solids, polyurea-based joint sealant that is self levelling and cures in approximately 30 minutes. It works equally well with asphalt and concrete and protects interior horizontal concrete expansion and control joints from spalling, chipping and\r\nbreakdown.
\r\nThis product can be applied at temperatures ranging from -18° to 65°C and possesses excellent chemical resistance, water resistance and thermal stability at both high and low temperatures.
FEATURES:
\r\nResene Armourchlor HB-F is a single pack high build chlorinated rubber finish coat providing outstanding resistance to corrosion in severe atmospheres, where it may be difficult or uneconomic to employ a two pack coating. These characteristics ensure maintenance free performance during many years' exposure in highly corrosive environments.
\r\n","","","","","","","","N/A","","",30,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",100,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","","","true","true","","",""],[591,"Resene Aquaclear","Resene Aquaclear has been developed as a waterborne alternative to turps thinned oil modified urethanes to enhance and protect timber.
\r\n\r\nAlso available in Natural version for a flat clear finish on interior timber walls and ceilings.
\r\n","","2 hours","N/A","","","","","N/A","Water","",28,"","","","","","","","","","","","","","","","","","","true","false","false","","","","","","",23,"","","","","","","","","","","2 hours","N/A","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","true","true","","",""],[673,"Resene Aquapoxy","","","6 Hrs","5 Days","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","6 Hrs","5 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","true","true","","",""],[574,"Resene ArmourX GP Metal Primer","","","12 hours","Data","","","","","N/A","Turps","",49,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",70,"","","","","","","","","","","12 hours","30 days","","","","","","","","","","","","","","","false","imported","false","false","false","false","false","false","false","","true","true","","",""],[674,"Resene ArmourX IF 503","","","48 hours","Data","","","","","4:1","Resene #6","",45,"","","","","","","","","","","","","","","","","","","false","false","true","","","","","","",50,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","","","true","true","","",""],[675,"Resene ArmourX IF 503 Metallic","","","48 hours","Data","","","","","4:1","Resene #6","",45,"","","","","","","","","","","","","","","","","","","false","false","true","","","","","","",50,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","","","true","true","","",""],[307,"Resene ArmourZinc 125","","","1 hour","Data","","","","","4:1","Resene #3A","",64,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",75,"","","","","","","","","","","1 hour","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[347,"Resene Armourcote 220","","","Data","Data","","","","","4:1","Resene #12","",52,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","4 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[463,"Resene Armourcote 221","","","6 hours","Data","","","","","4:1","Resene #8","",55,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","6 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[616,"Resene Armourcote 510","Resene Armourcote 510 is a high performance, self-priming epoxy mastic combining superb adhesion with true barrier properties. Will tolerate compromised surfaces such as hand-cleaned steel.
\r\n","","24 hours","Data","","","","","1:1","Resene #6","",86,"","","","","","","","","","","","","","","","","","","false","false","true","","","","","","",150,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","manufactured","true","true","false","false","false","false","false","Off-white, selected BS2660, BS5252 and Resene Total Colour System","true","true","","",""],[670,"Resene Armourcote 910","Armourcote 910 is a 1-Pack waterborne anti-corrosive Primer, designed specifically for the light industrial market and associated industries
\r\nThis fast drying hi-build primer covers extremely well and has good sand-ability. Excellent anti corrosive properties.
Armourcote 943 is a waterborne, single pack gloss top coat, specifically designed for
\r\nrefurbishing light industrial machinery or other steel items. This very fast drying, high build
\r\nproduct works most efficiently when applied through industry standard spray equipment
\r\nsuch as air assisted airless, airless conventional, pressure pot or suction, gravity type spray
\r\nguns. The one to one and a half coat application, allows increased productivity, excellent
\r\ncoverage and dries to a gloss finish.
Resene FX Metallic is special effect finish that imparts a metallic look to a wide range of surfaces, inside or out. May be applied by spray for the most stand out metallic effect or brushed on using a criss cross technique for a metallic paint effects style finish.
\r\n","","2 hours","N/A","","","","","N/A","Water","",41,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",34,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","true","true","","",""],[232,"Resene Galvo One","","","12 hours","30 days","","","","","N/A","Turps","",42,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",35,"","","","","","","","","","","12 hours","Extended","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[146,"Resene Galvo-Prime","Acrylic galvanised iron primer
\r\n","Acrylic primer for galvanising","2 hours","Data","Single Pack","",0,0,"N/A","Water","Water",42,0,30,40,0,"Mid Green","Satin","",0,"","","","","","","","","true","true","false","false","false","","4 and 10 litre","","",0,0,35,"","","","","","","","","","4hr","2 hours","N/A","","","","","Resene Arch","Primer","Acrylic",0,"October, 13 2004 00:00:00 +1300","","A Webb","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[153,"Resene Hi-Glo","","Acrylic","2 hours","Data","Single Pack","",0,0,"N/A","Water","Water",42,0,300,40,93,"","Gloss","",0,"","","","","","","","","true","true","false","false","false","","","Do not freeze","90 C",0,0,35,"","","","","","","","","","","2 hours","Extended","","","","","Altex / ICI","Finish","Acrylic",0,"","February, 08 2000 00:00:00 +1300","A Webb","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[19,"Resene Hi-Glo Acrylic MIOX","Acrylic MIO finish
\r\n","Acrylic MIO","","","Single Pack","",0,0,"N/A","Water","Water",40,1.549999952316,40,50,"","Dark Grey plus tints as per Resene chart","Semi-Gloss","","","","","","","","","","","true","true","false","false","false","","4 litre cans","Do not freeze","Thermoplastic","","",50,"NO","No","No","No","","","","","45 min","12 hrs","4 hrs","","30 min","8 hrs","2 hrs","","Altex","Finish","Acrylic",0,"","","","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[154,"Resene Hi-Glo Acrylic Roof Paint","Acrylic roof paint
\r\n","Acrylic","","","Single Pack","",0,0,"N/A","Water","Water",42,0,30,40,0,"Tint range plus micaceous colours","Gloss","",0,"","","","","","","","","true","true","false","false","false","","4 & 10 litre","","",0,0,35,"","","","","","","","","","40min","4 hr","N/A","","","","","Resene Arch","Finish","Acrylic",0,"October, 13 2004 00:00:00 +1300","","A Webb","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[164,"Resene Imperite I.F. 502 Semi Gloss Clear","Semi Gloss Clear over Imperite 503 Metallic
\r\n","Arylic Epoxy","","","Two Pack","",4,1,"4:1","R #6","",45,0,50,75,0,"Clear","Semi Gloss","",0,"To be used as a clear coating over Imperite 503 Metallic Effects","","","","","","","","true","true","false","false","false","","","","",0,0,50,"","","","","","","","","45 min","","2 hrs","","","","","","Resene Arch","Finish","Epoxy",0,"June, 29 2001 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[336,"Resene Imperite I.F. 503","","","48 hours","Data","","","","","4:1","Resene #6","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","2 hours","7 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[403,"Resene Imperite I.F. 503 Metallic","","","48 hours","Data","","","","","4:1","Resene #6","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","2 hours","7 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[169,"Resene Lumbersider Low Sheen","All Purpose Acrylic
\r\n","Acrylic","Data","Data","Single Pack","",0,0,"N/A","Water","Water",41,"",34,0,57,"Resene Colours","Satin","",0,"","","","","","","","","true","true","false","false","false","","0.5, 1, 4 and 10L","","",0,0,33,"","","","","","","","","","","2 hours","Extended","","","","","Resene Arch","Finish","Acrylic",0,"July, 05 2013 00:00:00 +1200","","G Moran","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[390,"Resene Lusta-Glo","","","Data","Data","","","","","N/A","Turps","",51,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",32,"","","","","","","","","","","16 hours","7 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[389,"Resene Lustacryl","","","Data","Data","","","","","N/A","Water","",41,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",34,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[238,"Resene Membrane Primer","","","2 hours","30 days","","","","","N/A","Water","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",28,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[583,"Resene Mica Bond","","","N/A","N/A","","","","","N/A","Turps","",55,"","","","","","","","","","","","","","","","","","","true","true","false","","","","","","",50,"","","","","","","","","","","16 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[642,"Resene Nason Industrial NI 690 ISF 2K","","","Data","Data","","","","","2:1","Data","",66,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","true","","true","true","","",""],[246,"Resene Non-Skid Deck & Path","","","Data","Data","","","","","N/A","Water","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",165,"","","","","","","","","","","3 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[193,"Resene Qristal Clear Poly-Satin","","Polyurethane Varnish","N/A","N/A","Single Pack","",0,0,"N/A","Turps","Turps",34,0,20,25,0,"Clear - Satin","Satin","",0,"","","","","","","","","true","true","false","false","false","","","","",0,0,21,"","","","","","","","","4 hr","12 hr","12 hours","7 days","","","","","A.Y.B.","Finish","Urethane",0,"June, 12 2002 00:00:00 +1200","","A Webb","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[236,"Resene Quick Dry","","","2 hours","Data","","","","","N/A","Water","",44,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",35,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[194,"Resene Resitex","Textured coating","","","","Single Pack","",0,0,"N/A","Water","Water",60,0,50,150,18,"","","",0,"","","","","","","","","true","true","false","false","false","","4 and 15 litres","","",0,0,150,"","","","","","","","","","","2 hours","","","","","","Resene Arch","","Acrylic",0,"September, 29 2004 00:00:00 +1200","","D Elder","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[231,"Resene Rust-Arrest","","","24 hours","30 days","","","","","N/A","Data","",55,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","24 hours","30 days","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[241,"Resene Sidewalk Paving Paint","","","","","","","","","","Turps","",32,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",35,"","","","","","","","","","","16Hrs","7Days","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","","","false","true","","",""],[197,"Resene Sonyx 101","","Semi gloss acrylic","Data","Data","Single Pack","",0,0,"N/A","Water","Water",46,0,35,40,0,"Tint range","Semi gloss","",0,"","","","","","","","","true","true","false","false","false","","1, 4, 10 litre","","",0,0,38,"","","","","","","","","45min","4hr","2 hours","Extended","","","","","Resene Arch","Finish","Acrylic",0,"November, 15 2004 00:00:00 +1300","","A Webb","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[585,"Resene SpaceCote Flat","","","Data","Data","","","","","N/A","Water","",41,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",37,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","false","","true","true","","",""],[477,"Resene SpaceCote Low Sheen","","","Data","Data","","","","","N/A","Water","",41,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",37,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","false","","true","true","","",""],[660,"Resene Summit Roof Metallic","","","Data","Data","","","","","N/A","Water","",40,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",33,"","","","","","","","","","","3 hours","Extended","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","true","true","","",""],[436,"Resene Summit Roof Semi Gloss","","","Data","Data","","","","","N/A","Water","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",38,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[244,"Resene Sun Defier Clear Glaze","","","","","","","","","","Water","",42,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",35,"","","","","","","","","","","5Hrs","","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","","","false","true","","",""],[243,"Resene Super Gloss","","","N/A","N/A","","","","","N/A","Turps","",45,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",28,"","","","","","","","","","","16 hours","30 days","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[233,"Resene Sureseal","","","3 hours","Data","","","","","N/A","Turps","",37,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",23,"","","","","","","","","","","3 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[230,"Resene Swimming Pool Paint","","","N/A","N/A","","","","","N/A","Resene #6","",63,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",70,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[604,"Resene Uracryl 400 Series","","","Data","Data","","","","","3:1","No.7a","",50,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",50,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","true","","true","true","","",""],[265,"Resene Uracryl 402 (Semi-Gloss)","","","Data","Data","","","","","3:1","No.7a","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[459,"Resene Uracryl 402 UVS Clear","","","Data","Data","","","","","3:1","No.7a","",50,"","","","","","","","","","","","","","","","","true","false","false","false","false","","","","","","",50,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[245,"Resene Uracryl 403 (Gloss)","","","Data","Data","","","","","3:1","No.7a","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[266,"Resene Uracryl 404 (Low Sheen)","","","Data","Data","","","","","3:1","No.7a","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","12 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[434,"Resene Uracryl 802 (WB Semi Gloss)","","","3 hours","7 days","","","","","5:1","Water","",48,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",40,"","","","","","","","","","","3 hours","7 days","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[584,"Resene Uracryl 803 (WB Gloss)","","","3 hours","7 days","","","","","5:1","Water","",48,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",40,"","","","","","","","","","","3 hours","7 days","","","","","","","","","","","","","","","false","imported","false","false","false","false","false","false","false","","true","true","","",""],[235,"Resene Waterborne Smooth Surface Sealer","","","Data","Data","","","","","N/A","Water","",25,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",20,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[656,"Resene Waterborne Sureseal","Resene Waterborne Sureseal is a pigmented penetrating sealer designed to ready a wide range of interior surfaces ready for topcoating. It reduces bleeding of water stains and dries without the unwanted and strong solvent odours associated with traditional solventborne products.
\r\n","","2 hours","Data","","","","","NA","Water","",37,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",31,"","","","","","","","","","","2 hours","Data","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","false","Off white","true","true","","",""],[713,"Resene Wood Primer","","","24 hours","Data","","","","","N/A","Data","",55,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",46,"","","","","","","","","","","24 hours","Data","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","true","true","","",""],[240,"Resene X-200","","","Data","Data","","","","","N/A","None","",54,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",90,"","","","","","","","","","","3 hours","Extended","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[239,"Resene X-400","","","Data","Data","","","","","N/A","N/A","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","3 hours","Extended","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[234,"Resene Zincilate 11","","","Data","Data","","","","","N/A","Resene #9","",60,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",75,"","","","","","","","","","","16 hours","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","false","false","","true","true","","",""],[582,"Resene Zylone Sheen","","","2 hours","Data","","","","","N/A","Water","",38,"","","","","","","","","","","","","","","","","","","true","false","false","","","","","","",27,"","","","","","","","","","","2 hours","Extended","","","","","","","","","","","","","","","false","manufactured","false","false","false","false","false","false","false","","true","true","","",""],[305,"Resene:Armourzinc 125","","","","","","","","","4:1","","",64,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",75,"","","","","","","","","","","1½ hr","","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[306,"Resene:Enamacryl","","","","","","","","","N/A","Water","",50,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",45,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","false","false","false","false","false","","","false","true","","",""],[640,"Road Marking Paint","Designed for road surfaces with a relatively high vehicle traffic count, providing a higher level of durability than traditional road marking paints.
\r\n\r\nFEATURES:
\r\n\r\nRustbond is a cross-linked penetrating primer/sealer with excellent wetting properties. It is highly flexible with good chemical and solvent resistance, and will accept a variety of topcoats.
\r\n\r\nRecommended use as primer/sealer for marginally prepared steel and over old coatings. The excellent wetting properties allows it to penetrate rust and discontinuities in existing coatings and provide a firm anchorage for a variety of topcoats.
\r\n\r\nThe thixotropic character reduces run off, ensuring that the edges of existing coatings are encapsulated thus reducing undercutting and peeling.
\r\n","","18 hours","30 days","","","","","1:1","#76","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","1L, 4L","","","","",40,"","","","","","","","","","","18 hours","30 days","","","","","","","","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","false","true","","",""],[290,"Rustbond FC","","","","","","","","","1:1","#76","",90,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","23hrs","21dys","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[638,"Rustbond PS","Rustbond PS is a very low VOC epoxy primer/sealer that combines outstanding surface tolerance characteristics over marginally prepared substrates and user-friendly features. It accepts a variety of topcoats and can help save time and money by minimising surface preparation requirements for new construction, maintenance and overcoating projects. Rustbond PS has good pot life at higher temperatures to help minimise waste and also cures at low temperatures down to 1.7°C with Epoxy Accelerator so you have one Rustbond product for year-round application.
\r\n\r\nFEATURES:
\r\nAvailability: New Zealand only.
\r\n\r\nSea~Barrier 1000 is a cost effective ablative antifouling coating, designed for commercial applications.
\r\nIt is ideal for vessels that are dry-docked annually.
\r\nSea~Barrier 1000 is the ideal antifoul coating for:
Note: For 12 – 24 months service refer to Sea~Barrier 3000.
\r\n\r\nFEATURES:
\r\n\r\nSea~Barrier® 3000 is a high performance, ablative antifouling coating and is recommended for use where:
\r\n\r\nSea~Barrier® 3000 is the ideal antifoul coating for both Maintenance Docking and New Builds.
\r\n\r\n\r\n\r\n
Sea~Barrier® 3000 is suitable for:
\r\n\r\nSea~Barrier 3000 is a high performance, high copper loading, tin-free, ablative antifouling utilising an engineered binder matrix resulting in a controlled and effective release of biocide during operation over extended service periods.
\r\nSea~Barrier 3000 is the ideal antifouling coating for:
FEATURES:
\r\nSea~Barrier 3000 is a high performance, high copper loading, tin-free, ablative antifouling utilising an engineered binder matrix resulting in a controlled and effective release of biocide during operation over extended service periods.
\r\nSea~Barrier 3000 is the ideal antifouling coating for:
FEATURES:
\r\nCopper Based Semi-Ablative Cleanable Anti-Fouling
\r\n\r\nSea~Barrier® 4000 is a high performance, semi-hard, semi- ablative antifouling coating utilising both cuprous oxide and advanced biocide technologies to provide long-term antifouling protection..
\r\n\r\nSea~Barrier® 4000 is recommended for use where:
\r\n\r\nSea~Barrier 5000 AU is a high performance, high copper loading, ablative antifouling utilising an engineered binder matrix resulting in a controlled and effective release of biocide during operation over extended service periods.
Sea~Barrier 5000 AU is the ideal antifouling coating for:
FEATURES:
Availability: New Zealand only
\r\nSea~Barrier Alloy 100 PLUS is designed for commercial use on aluminium vessels working in\r\nand off shore. It is also recommended for use on aluminium components such as stern drives, jetdrives,\r\noutboard motors
\r\nFEATURES
\r\nSea~Barrier® Altra Antifouling is a new generation Silyl Acrylate formulation that protects hulls from marine growth though a self polishing hydrolysis action.
\r\n\r\nThe silyl acrylate, cuprous oxide and co-biocide combination provides outstanding protection that exceeds normal cuprous oxide based formulations. Extensive testing has proven Sea~Barrier® Altra to be at the cutting edge of antifouling technology.
\r\n","","N/A","N/A","","","","","N/A","#10","",55,"","","","","","","","","","","","","","","","","","","false","true","true","","10L","","","","",75,"","","","","","","","","","","9 hours","Data","","","","","","","","","","","","","","true","true","manufactured","true","true","false","false","true","true","false","Red, Black, Blue","false","true","","",""],[652,"Sea~Barrier Altra NZ","Sea~Barrier Altra is a new, patented silyl acrylate polymer based antifouling designed to protect hulls from marine growth through an outstanding controlled self polishing hydrolysis action - the silyl acrylate, cuprous oxide and co-biocide combination provides exceptional multi-season protection.
\r\nExtensive testing and sea trials show Sea~Barrier Altra to be providing exceptionally cost effective, long term protection for commercial & deep water use. Ideal for work vessels of virtually any description such as fishing fleets, tugs and barges, container ships, passenger and vehicle ferries, and vessels trading in deep sea or coastal waters.
FEATURES:
\r\nPrimer for Semstone range.
\r\n","","6 Hrs","48 Hrs","","","","","2:1","#12","",100,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",125,"","","","","","","","","","","6 hour","3 days","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","true","true","","",""],[379,"Semstone 110 Damp-Proof Primer","SEMSTONE 110/110EP Damp-Proof Primer is a two part epoxy that exhibits superior adhesion to concrete
\r\nand steel. SEMSTONE 110/110EP Damp Proof Primer is used in conjunction with many of Carboline’s
\r\ncoatings.
Semstone 145 is a 100% solids, high performance, novolac epoxy lining system designed for concrete.
\r\n\r\nSemstone 145 is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 145 is specially formulated to withstand some of industry’s most aggressive chemicals, including 98% sulfuric acid, as well as many organic chemicals and solvents
\r\n","","","","","","","","4:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",2500,"","","","","","","","","","","12hrs","24hrs","","","","","","","","","","","","","","","false","","true","true","true","true","false","false","false","","true","true","","",""],[301,"Semstone 145 AFC","","","","","","","","","4:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",2500,"","","","","","","","","","","12 hr","24 hr","","","","","","","","","","","","","","","false","","true","false","true","false","false","true","","","false","true","","",""],[337,"Semstone 800 Scratch-Coat","","","","","","","","","1:1:½","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",200,"","","","","","","","","","","12hr","24hr","","","","","","","","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[298,"Semstone 800 Series Primer","","","","","","","","","15:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",270,"","","","","","","","","","","12 hr","24 hr","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","","","true","true","","",""],[443,"Semstone 8084","","","","","","","","","99:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",100,"","","","","","","","","","","2 hours","2 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[636,"Semstone 870","Semstone 870 is a high performance, vinyl ester lining system designed for concrete. Semstone 870 is formulated to be more flexible than typical vinyl esters to tolerate more concrete movement. It is a semi-leveling coating which may be applied as an aggregate filled and/or reinforced coating system. Semstone 870 is specially formulated to withstand some of industry’s most aggressive chemicals, including a broad range of organic chemicals.
\r\n","","12 hours","24 hours","","","","","60:1","N/A","",100,"","","","","","","","","","","","","","","","","","","true","true","true","","1 gal, 5 gal","","","","",750,"","","","","","","","","","","12 hours","24 hours","","","","","","","","","","","","","","","false","imported","true","false","false","false","false","false","false","Light Grey","true","true","","",""],[299,"Semstone 870 Vinyl Ester","","","","","","","","","20:1","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1500,"","","","","","","","","","","12 hr","24 hr","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[442,"Semstone 884","\r\n\r\n
\r\n","","","","","","","","Data","N/A","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",25000,"","","","","","","","","","","8 hours","5 days","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[323,"Sila~Crete","","","","","","","","","N/A","N/A","",30,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",50,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","true","false","false","false","false","true","","","false","true","","",""],[411,"Southwest Type 5GP ","
Made to Order or imported lines subject to availability.
\r\n\r\nA gypsum based, Spray-applied Fire Resistive Material (SFRM) designed for the fire protection of interior structural steel. Formulated and applied to meet the minimum bond strength requirements of the IBC Code listed in the “High Rise Building Section\" for buildings up to 22.9m (75 feet).
\r\nA 240 kg/m³ (15 lb./ft³) SFRM intended for the fire protection of interior structural columns, beams, joists, decks, walls, roofs, girders, floors and pre-cast concrete units. It is tested and certified for fire resistance ratings up to 4 hours.
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\nSolvent-free patching compound used for repairing pits, cracks and voids in steel, concrete, wood and other surfaces. Has the unique ability to be mixed, applied and cured underwater.
\r\nFEATURES:
\r\n\r\nVinyl Acrylic MIO Primer for Transpower Towers
\r\n","Vinyl","16 hours","10 days","Single Pack","","","","N/A","#10","",49,1.490000009537,50,75,424,"Green","Flat","","","","","","Vinyl Primer","","","March, 26 1999 00:00:00 +1200","","true","true","false","false","false","","","","70 C dry",24,"",60,"","","","","","","","","1 hr","16 hrs","16 hours","14 days","1 hr","16 hrs","16 hrs","","Altex / ICI","Primer","Vinyl / Acrylic","","","","","","","","false","manufactured","true","true","true","false","false","false","","","false","true","","",""],[205,"TP Vinyl 2 Topcoat","Vinyl Acrylic MIO Finish for Transpower Towers
\r\n","Vinyl MIO Finish","","","Single Pack","","","","N/A","#10","X100",45,1.47000002861,40,80,474,"Grey (Transpower Spec Colour)","Flat","","","","","","Grey flat vinyl topcoat","","","March, 26 1999 00:00:00 +1200","","true","true","false","false","false","","4 litre cans","","70 C dry",24,"",50,"","","","","","","","","1 hr","16 hrs","16hr","","","","","","Altex / ICI","Finish","Vinyl / Acrylic","","","","","","","","false","","true","true","true","false","false","false","","","false","true","","",""],[556,"TP Vinyl FC Finish","TP Vinyl FC Finish is designed as the finish coat for the repainting of aged, weathered galvanised structures. It is used in conjunction with TP Vinyl FC Primer.
\r\nFEATURES:
\r\nTP Vinyl FC Primer is specifically formulated for the priming of aged, weathered galvanised structures.
\r\nFEATURES:
\r\nMade to order or imported product subject to avalability.
\r\n\r\nA high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures
\r\n\r\nUsed in conjunction with Thermaline 400 Finish
\r\n\r\n\r\n","","24 hours","5 days","","","","","4:1","#2","",65,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5L","","","","",125,"","","","","","","","","","","24 hours","5 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","false","true","false","Red (0500)","false","true","","",""],[372,"Thermaline 400 Primer & Finish","
Made to order or imported product subject to avalability.
\r\n\r\nA high performance, immersion grade coating system which has excellent resistance to wet/dry cycling conditions at elevated temperatures
\r\n\r\nUsed in conjunction with Thermaline 400 Primer
\r\n","","N/a","N/a","","","","","4:1","#2","",65,"","","","","","","","","","","","","","","","","true","true","false","false","false","","5L","","","","",125,"","","","","","","","","","","24 hours","5 days","","","","","","","","","","","","","","","false","imported","true","true","true","false","true","true","false","Red - Primer, Grey - Finish","false","true","","",""],[456,"Thermaline 4001","A high performance coating which has outstanding resistance to wet/dry cycling conditions at elevated temperatures, typically used to protect steel substrates under insulation operating up to 649°C
\r\n","","","","","","","","N/A","#10","",53,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",125,"","","","","","","","","","","2 hours","5 days","","","","","","","","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[280,"Thermaline 450","Highly cross-linked, glass-flake filled polymer that offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures. Suitable for insulated or uninsulated pipes (refer to Limitations), stacks and equipment operating up to 232°C. This coating provides excellent resistance to corrosion, abrasion and permeation, and its novolac-modification resists severe chemical attack. This extreme performance product has decades of performance and is recommended for CS-1,3,4 and SS-1,2,3 systems of NACE SP0198 Standard Practice for coatings\r\nto control corrosion under insulation (CUI).
\r\n\r\nFEATURES:
\r\nHigh-performance finish for areas exposed to extreme temperatures. Suitable for service from\r\n204°C-538°C (400°F-1000°F). Requires heat curing.
\r\nFEATURES:
\r\nAir-dried coating suitable for high temperature exposures up to 273°C (525°F). Air-drying characteristics allow for faster handling of in-shop applications than with other high-temperature coatings. Heat cure above 150°C (300°F) is recommended and will impart added strength and integrity to the coating.
\r\n\r\nFEATURES:
\r\nMade to order or imported product subject to availability.
\r\n\r\nThis is an extreme performance coating for hot, cryogenic and cycling exposures. Thermaline Heat Shield contains a unique blend of plate-like reinforcing pigments fortified with an inert polymeric matrix. The resulting film provides an outstanding barrier against corrosives and harsh exposures typically seen in elevated temperature environments. This versatile coating is ideal for all piping, vessels and equipment operating from cryogenic conditions up to 650°C (1200°F). It is particularly well suited to prevent corrosion under insulated equipment/piping for both carbon steel substrates and stainless steels. This fortified coating has superior shop handling properties over standard silicone coatings (see Curing). It is recommended for CS-6 and SS-5 systems of NACE SP0198 Standard Practice for coatings to control corrosion under insulation (CUI).
\r\n\r\nFEATURES:
\r\n\r\nMade to Order or imported lines subject to availability.
\r\n\r\nA water based mastic that can be applied to electrical cables to retard fire propagation. Once applied, it meets code and insurance requirements for interior and exterior use. It provides a hard and flexible surface that will not dust, flake, or spall.
\r\n","","Data","Data","","","","","N/A","Water","",53,"","","","","","","","","","","","","","","","","","","false","true","true","","5 Gallon","","","","",1600,"","","","","","","","","","","Data","Data","","","","","","","","","","","","","","","false","","true","false","false","false","false","false","false","","false","true","","",""],[325,"Thermo-Lag 3000-SP","Made to Order or imported lines subject to availability.
\r\nCertified Applicators Only. Applicator Note: Thermo-Lag 3000-SP may only be applied by trained and approved applicators;\r\nrefer to Altex Coatings for approved applicator listings in your area.
\r\n\r\nThermo-Lag 3000-SP is a flexible, two-component epoxy Intumescent Fireproofing coating designed to provide asset integrity from the damaging effects of hydrocarbon fires. Since 1999 Thermo-Lag 3000-SP has provided fire protection in the harshest of environments, such as oil, gas, refineries, power, marine, petrochemical, and LNG facilities.
\r\nThermo-Lag 3000-SP has been extensively and independently tested in accordance with: UL 1709, UL 2431 Category I-A, ISO 834-3, IMO FTP Code (IMO A.754(18) for H-0, H-60 & H-120 Divisions, ASTM E84, ASTM E119, ISO 20340, NORSOK M-501 5A Fire and Corrosion Testing, and NFPA 290 (extended to 150 minutes).
FEATURES:
\r\n\r\nA two component, epoxy based, thermally activated, intumescent coating which is primarily spray applied directly over Thermo-Lag® 3000 series EPFP.
\r\n\r\nThermo-Lag® 3002 provides a hard, durable duplex system that allows for the reduction of coating thickness in a jet fire environment as well as enhanced environmental resistance
\r\n\r\n\r\n\r\n
\r\n","","","","","","","","1:1","","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",3000,"","","","","","","","","","","4 hrs","14 dy","","","","","","","","","","","","","","","false","","true","true","true","false","false","false","false","","true","true","","",""],[613,"Thermo-Lag E100 S","
Made to Order or imported lines subject to availability.
\r\nCertified Applicators Only. Thermo-Lag E100 S may only be applied by trained and approved applicators; refer to Altex Coatings for approved applicator listings in your area.
\r\nAn epoxy intumescent fireproofing for commercial and light industrial applications. It was specifically designed with an advanced formulation to provide 1-3 hour cellulosic fire protection for structural steel beams, I-section columns, tubular columns and pipes without the need for reinforcing mesh. It provides a fast curing, aesthetically pleasing fire protection solution and is rated for both exterior and interior applications.
\r\nFEATURES:
\r\nSpraying thinner for use with: Industrial Coatings Chem~Bar range, approved potable water thinner for Carboguard 690, and used in various antifoulings, Thermaline products and other types.
\r\n\r\nPleasure Marine Products, for brush/roller & spray application of AY&B PrimaShield Antifouling Sealer, and spray application of Pettit Vivid Antifouling.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[521,"Thinning Solvent #109","This solvent is specifically used for juditious thinning of Carboguard 696 HBE and UHBE.
\r\n\r\n\r\n\r\n
It may also be used as a faster drying degreaser.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","4L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","",""],[512,"Thinning Solvent #12","Pleasure Marine: Thinning solvent for spray application of AY&B Epoxy Aluminium Primer, Epoxy Primer, Epoxy Barrier Undercoat, Epoxy High Build Surfacer, and Epoxy Everseal.
\r\n\r\nIndustrial Coatings range include some of the epoxy high build coatings, epoxy primers, antifoulings and resins.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","500ml, 1L, 4L, 20L, 200L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[614,"Thinning Solvent #127","Spraying thinner developed for spray application of Carbothane 134HG - especially in cooler temperatures.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","",""],[707,"Thinning Solvent #130","Pleasure Marine: Thinning solvent for AY&B No.5 Antifouling.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","false","true","true","false","true","true","false","","true","true","","1L, 4L",""],[522,"Thinning Solvent #155","Thinning Solvent #155 is for thinning Altra~Etch.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[510,"Thinning Solvent #2","Spraying thinner for a range of Carboguard, Carbomastic & other industrial/commercial marine products.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[513,"Thinning Solvent #20","Pleasure Marine:
\r\n\r\nSpecialised spraying thinner for AY&B Elite Pro~Spray Polyurethane.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[523,"Thinning Solvent #21","Made to order or imported product subject to avalability.
\r\n\r\nUsed to thin Carboweld 11 as the standard thinner, and may be used in cold temperatures < 10°C in Carbozinc 11.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","20L (MTO)","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","imported","false","true","true","false","true","false","false","","true","true","","",""],[560,"Thinning Solvent #213","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","true","false","false","","true","true","","",""],[709,"Thinning Solvent #214","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","","false","true","true","false","true","false","","","true","true","","",""],[515,"Thinning Solvent #22","Pleasure Marine: This thinner is used as a dual purpose slow evaporating brushing/rolling thinner within the AY&B range, including Epoxy Aluminium Primer, Epoxy Primer, Polyurethane Undercoat, Epoxy Barrier Undercoat, Elite 321 Brishing Polyurethane.
\r\n\r\n#22 is also suitable for the Industrial range Carbothane and E~Line polyurethanes when brushing or rolling.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","1L, 4L",""],[514,"Thinning Solvent #25","Pleasure Marine: For use with AY&B Polyurethane Undercoat, (spray) and Pettit Vivid Antifouling (brush/roller).
\r\n\r\nMay be used in our Industrial Range of Polyurethanes, including Carbothane and E~Line.
\r\n\r\nMay also be used as a brush/roller thinner for a selection of epoxy coatings.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","false","true","true","false","true","true","false","","true","true","","1L, 4L, 20L",""],[516,"Thinning Solvent #26","The primary thinner for Carbozinc 11 (solvent borne, not the WB version)
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","false","true","true","false","true","true","false","","true","true","","4L, 20L",""],[517,"Thinning Solvent #33","A slower evaporating thinner for some of the Carbozinc and Carboweld products.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","4L, 20L",""],[525,"Thinning Solvent #45 ","Pleasure Marine: Brush/roller Thinning Solvent for use with AY&B Multipurpose Primer, AY&B Surfacer Undercoat, AY&B Regatta Gloss Enamel, AY&B Timbercote Exterior Varnish.
\r\n\r\nIndustrial: Brush/roller thinner for single pack products High Build Rust Barrier, Isotal Undercoat, Isotal Enamel and Multi~Bond primer.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","1L, 4L, 20L (NZ only)","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","false","true","true","false","true","true","false","","true","true","","1L, 4L",""],[519,"Thinning Solvent #53","Pleasure Marine: Thinning Solvent #53 is the spraying thinner for our AY&B Surfacer Undercoat & Timbercote Exterior Varnish, MultiPurpose Primer and Regatta Gloss Enamel.
\r\n\r\nIndustrial range spraying thinner for (single pack) alkyd enamels, alkyd undercoats and some primers.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","true","false","","1L, 4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","manufactured","false","true","true","false","true","true","false","","true","true","","",""],[520,"Thinning Solvent #76","Thinning Solvent 76 is used in Carboguard 635 for atmospheric exposures.
\r\n\r\nIt is a fast evaporating ketone based thinner, and may be used in cooler temperatures to reduce tack free times in polyurethane coatings - Carbothane, E~Line and Elite Pro~Spray.
\r\n","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","4L, 20L","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","true","","false","true","true","false","true","true","false","","true","true","","4L, 20L",""],[203,"Timbercote","Exterior Grade Clear Varnish Gloss","UV Resistant Alkyd Gloss Varnish","","","Single Pack","","","","","#53","T48",52,0.949999988079,30,40,"","Light Amber Clear","High Gloss","","","","","","","","","","","true","true","false","false","false","","1 & 2 litre cans","","",35,"",35,"","","","","","","","","2.5 hrs","12 hrs","12 hrs","1 wk","","","","","Altex / ICI","Finish","Alkyd","","","February, 07 2000 00:00:00 +1300","A Webb","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[202,"Timbercote with 50% Thinner *","Exterior Grade Clear Varnish Gloss","UV Resistant Alkyd Gloss Varnish","","","Single Pack","","","","","#53","T48",26,0.949999988079,30,40,"","Light Amber Clear","High Gloss","","","","","","","","","","","true","true","false","false","false","","1 & 2 litre cans","","",35,"",35,"","","","","","","","","2.5 hrs","12 hrs","12 hrs","1 wk","","","","","Altex / ICI","Finish","Alkyd","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[708,"Tremco Dural 452 MV","Dural 452 MV is a two-component, 100% solids, moisture insensitive, high strength epoxy adhesive and binder for numerous applications. This high modulus, medium viscosity epoxy resin is the perfect solution for bonding new, plastic concrete to existing concrete slabs and steel.
\r\n\r\nUSAGE/PURPOSE:
\r\n\r\nFEATURES:
\r\n\r\nAltex Coatings products treated with Ultra-Fresh* Antimicrobial Additive compound provide protection from the germination and outgrowth of micro-organisms by changing the coating from one that may be conducive to microbial replication to one that is non-conducive for replication.
\r\nCoatings treated with Ultra-Fresh* Antimicrobial Additive provide a long-term solution for microbial protection and product cleanliness by inhibiting the growth of bacteria, fungi and a range of other micro-organisms on the coating that can cause odours, staining, and deterioration.
Industry leader in resin technology, West Resins are available through Altex Yacht & Boat.
\r\n\r\n\r\n\r\n
Proven performance in the new build, high end yacht construction industry.
\r\n\r\nUsed with confidence within the AY&B coating system/s.
\r\n","","","","","","","","4:1","Data","",100,"","","","","","","","","","","","","","","","","true","true","false","false","false","","","","","","",1000,"","","","","","","","","","","Data","Data","","","","","","","","","","","","false","","","false","","false","false","false","false","false","true","","","false","true","","",""],[217,"ZECA Primer","A specialised primer for below waterline applications on aluminium hulled commercial vessels.
\r\n\r\n\r\n\r\n
May only be specified by Altex Technical Services Dept.
\r\n","Epoxy","5 hours","7 days","Two Pack","",2,1,"2:1","#12","",46,1.899999976158,60,100,"","Red","Flat","",10,"","","","","","","December, 07 1994 00:00:00 +1300","","true","true","false","false","false","","1.5 and 6 litre kits","","","",30,75,"","","","","","","","","30 min","5 hrs","5 hours","7 days","","","","","Altex / ICI","Zinc Rich Primer","Inorganic/Mod. Inorganic","","","","","","","","false","manufactured","true","true","true","false","false","false","false","","true","true","","",""],[219,"ZP632 Epozinc Primer","Epoxy Zinc Rich Primer","Epoxy Zinc Rich","","","Two Pack","",4,1,"4:1","693","",58,3,50,100,382,"Grey","Flat","",12,"","","","","","","","","true","true","false","false","false","","5 litre kit","","120 C dry",21,30,50,"","","","","","","","","2 hrs","8 hrs","12 hrs","Data","","","","","SuperNavi","Zinc Rich Primer","Epoxy","","","","","","","","false","","false","false","false","false","false","true","","","false","true","","",""],[572,"Zinc Filler","","","","","","","","","","","",0,"","","","","","","","","","","","","","","","","","","false","false","false","","","","","","",0,"","","","","","","","","","","","","","","","","","","","","","","","","","","false","manufactured","false","true","true","false","false","false","false","","true","true","","",""],[220,"Zinc Silicate 8641","Inorganic Ethyl Zinc Silicate","Inorganic zinc silicate","","","Two Pack","","","","5L kt","8641","",60,0,50,80,570,"Grey, Green","Flat","",10,"","","NZ PASS (APAS ?) PASS-C-29/8\r\nConforms to AS 2105 Type 4\r\nGPC-C-29/8A Register No. 5026","Inorgainc Ethyl Zinc Silicate","","","August, 30 1994 00:00:00 +1200","","true","true","false","false","false","","5 litre kits","Silicate Base, 6 months","> 400 C dry","","",75,"","","","","","","","","30 min","4 hrs","24hr","Data","","","","","Altex / ICI","Zinc Rich Primer","Inorganic/Mod. Inorganic","","","","","","","","false","","true","true","false","false","false","true","","","false","true","","",""],[218,"Zinkex 100","An excellent primer for chlorinated rubber and vinyl finish coats. It may be used as a “cold galvanising” coating for the repair of hot-dip galvanised surfaces.
\r\nMay be left untopcoated in non-corrosive atmospheres. For this type of service 75 microns DFT is recommended.
\r\nZinkex 100 is suitable for maintenance use in the following areas:
FEATURES:
\r\n